User's Manual

7.3 Group Management
The client provides groups to manage the added resources in dierent groups. You can group the
resources into dierent groups according to the resources'
locaons.
Example
F
or example, on the 1st oor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You
can organize these resources into one group (named 1st Floor) for convenient management. You
can control door status, and do some other operaons of the devices aer managing the resources
by groups.
7.3.1 Add Group
You can add group to organize the added device for convenient management.
Steps
1. Enter the Device Management module.
2. Click Device Management → Group to enter the group management page.
3. Create a group.
-
Click Add Group and enter a group name as you want.
-
Click Create Group by Device Name and select an added device to create a new group by the
name of the selected device.
7.3.2 Import Resources to Group
You can import the device resources to the added group in a batch.
Be
fore You Start
Add a group for managing devices. Refer to Add Group .
Steps
1. Enter the Device Management module.
2. Click Device Management → Group to enter the group management page.
3. Select a group from the group list and select the resource type such as Access Control Point.
4. Click Import.
5. Select the channel names from the To Be Imported area.
6. Click Import to import the selected resources to the group.
7.3.3 Edit Resource Parameters
Aer
imporng the resources to the group, you can edit the resource parameters. For access
points, you can edit the resource name.
Access Control Terminal User Manual
54