User's Manual

Before You Start
Import the resources to group. Refer to Import Resources to Group .
Steps
1. Enter the Device Management module.
2. Click Device Management → Group to enter the group management page.
All the added groups are displayed on the le.
3. Select a gr
oup on the group list and click a resource type.
The resource channels imported to the group will display.
4. Click
in the Operaon column to open the Edit Camera window.
5. E
dit the required informaon.
6. Click OK t
o save the new sengs.
7.3.4 Remove Resources from Group
You can remove the added resources from the group.
Steps
1. Enter the Device Management module.
2. Click Device Management → Group to enter the group management page.
All the added groups are displayed on the le.
3. Click a gr
oup to show the resources added to this group.
4. Select the resource(s) and click Delete to remove the resource(s) from the group.
7.4 Person Management
You can add person informaon to the system for further operaons such as access control, video
in
tercom, me and aendance, etc. You can manage the added persons such as issuing cards to
them in a batch, imporng and exporng person informaon in a batch, etc.
7.4.1 Add Organizaon
You can add an organizaon
and import person informaon to the organizaon for eecve
management of the persons. You can also add a surbodinate organizaon for the added one.
Steps
1. Enter Person module.
2. Select a parent
organizaon in the le column and click Add in the upper-le corner to add an
organizaon.
3. Create a name for the added organizaon.
Access Control Terminal User Manual
55