User's Manual

3. Select the person to move.
4. Click Change Organizaon.
5. Select the organizaon to move persons to.
6. Click OK.
7.4.15 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to mulple persons in a batch.
St
eps
1. Enter Person module.
2. Click Batch Issue Cards.
All the added persons with no card issued will display.
3. Set the card issuing parameters. For details, refer to Set Card Issuing Parameters .
4. Click Inialize to inialize the card enrollment staon or card reader to make it ready for issuing
cards.
5. Click the card number column and enter the card number.
-
Place the card on the card enrollment staon.
-
Swipe the card on the card reader.
-
Enter the card number manually and press Enter key on your keyboard.
The card number will be read automacally and the card will be issued to the person in the list.
6. Repeat the above step to issue the cards to the persons in the list in sequence.
7.4.16 Report Card Loss
If the person lost his/her card, you can report the card loss so that the card's related access
authorizaon will be inacve.
Steps
1. En
ter Person module.
2. Select the person you want to report card loss for and click Edit to open the Edit Person
window.
3. In the Credenal → Car
d panel, click
on the added card to set this card as lost card.
Aer
reporng card loss, the access authorizaon of this card will be invalid and inacve. Other
person who gets this card cannot access the doors by swiping this lost card.
4. Oponal: If the lost card is found, you can click
to cancel the loss.
Aer cancelling card loss, the access authorizaon of the person will be valid and acve.
5. If the los
t card is added in one access group and the access group is applied to the device
already, aer
reporng card loss or cancelling card loss, a window will pop up to nofy you to
apply the changes to the device. Aer applying to device, these changes can take eect on the
device.
Access Control Terminal User Manual
64