User's Manual

Note
Up to 4 holidays can be added to one template.
1) Click Holida
y tab.
2) Select a holiday in the le list and it will be added to the selected list on the right panel.
3) Oponal: Click Add to add a new holiday.
Note
For details about adding a holiday, refer to Add Holiday .
4) Oponal: Select a select
ed holiday in the right list and click
to remove the selected one,
or click Clear t
o clear all the selected holiday(s) in the right list.
7. Click Save to save the sengs and nish adding the template.
7.6 Set Access Group to Assign Access Authorizaon to Persons
Aer adding the person and conguring the person's credenals, you can create the access groups
to dene which person(s) can get access to which door(s) and then apply the access group to the
access control device to take eect.
Steps
• For one person, you can add up to 4 access groups to one access control point of one device.
• You can add up to 128 access groups in total.
• When the access group sengs are changed, you need to apply the access groups to the devices
ag
ain to take eect. The access group changes include changes of template, access group
sengs, person's access group sengs, and related person details (including card number,
ngerprint, linkage between card number and ngerprint, linkage between card number and
ngerprint, card password, card eecve period, etc).
1. Click Access Con
trol → Access Group to enter the Access Group interface.
2. Click Add to open the Add window.
3. In the Name text eld, create a name for the access group as you want.
4. Select a t
emplate for the access group.
Note
You should congure
the template before access group sengs. Refer to Congure Schedule
and Template for details.
5. In the le list of the Select Person eld, select person(s) and the person(s) will be added to the
select
ed list .
6. In the le list of the Select Door eld, select door(s) or door staon(s) for the selected persons
to access, and the selected door(s) or door staon(s) will be added to the selected list.
7. Click OK.
8. Aer adding the access groups, you need to apply them to the access control device to take
eect.
Access Control Terminal User Manual
68