Product Chart

Note
Aer you change the system language, the device will reboot automacally.
6.2 Set Network Parameters
Aer acvaon and select applicaon mode, you can set the network for the device
Steps
1.
When you enter the Select Network page, select Wired Network or Wi-Fi for your actual needs.
Figure 6-2 Select Network
Note
Disconnect the wired network before connecng a Wi-Fi.
2.
Select Next.
Wired Network
Note
Make sure the device has connected to a network.
If enable DHCP, the system will assign the IP address and other parameters automacally.
DS-K1T321 Series Face Recognion Terminal
20