Product Chart

7.1.2 Login by Acvaon Password
You should login the system before other device operaons. If you do not congure an
administrator, you should follow the
instrucons below to login.
Steps
1.
Long press OK to enter Authencate via Admin page.
2.
Press to enter the password.
-
If you have added an administrator for the device, press OK and enter the password.
-
If you haven't added an administrator for the device, enter the password.
3.
Press OK to enter the home page.
Note
The device will be locked for 30 minutes aer 5 failed password aempts.
7.1.3 Forgot Password
If you forget the password during authencaon, you can change the password.
Steps
1.
Long press OK to enter Authencate via Administrator page.
2.
Press to enter the password entering page, and then press ESC.
3.
Select Forgot Password.
4.
Answer the security
quesons that congured when acvaon.
5.
Create a new password and conrm it.
6.
Press OK.
7.2
Communicaon Sengs
You can set the wired network, the Wi-Fi parameter, the RS-485 parameters, the Wiegand
parameters, ISUP and access to Hik-Connect on the communicaon sengs page.
7.2.1 Set Wired Network Parameters
You can set the device wired network parameters, including the IP address, the subnet mask, the
gateway, and DNS parameters.
Steps
1.
Select Basic → Comm.
(Communicaon) to enter the Communicaon sengs page.
2.
On the Communicaon page, select Wired Network.
DS-K1T321 Series Face Recognion Terminal
25