Product Chart

The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Normal User
The User is the normal user. The user can only authencate or take aendance on the inial
page.
7.
Press ESC and then press OK to save the sengs.
7.3.6 Set Authencaon Mode
Aer adding the user's face picture, password, or other credenals, you should set the
authencaon mode and the user can authencate his/her identy via the congured
authencaon mode.
Steps
1.
Long press OK and login the device.
2.
Select User → Add User → Auth.
Sengs .
3.
Select Device or Custom as the
authencaon mode.
Device
If you want to select device mode, you should set the terminal authencaon mode in Access
Control Sengs page rst. For details see Seng Access Control Parameters.
Custom
You can combine dierent authencaon modes together according to your actual needs.
4.
Press ESC to save the
sengs.
7.3.7 Edit User
Aer adding the user, you can edit it.
Edit User
On the User Management page, select a user from the User List to enter the User Informaon
page. Follow the steps in User Management to edit the user parameters. Press ESC to save the
sengs.
Note
The employee ID cannot be edited.
7.4 Data Management
You can delete data, import data, and export data.
DS-K1T321 Series Face Recognion Terminal
38