Product Chart

Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device
me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's me.
Server Address/NTP Port/Interval
You can set the server address, NTP port, and interval.
DST Sengs
Check DST to enable DST sengs.
Set the DST start me, end me and bias me.
Click Next to save the sengs and go to the next parameter. Or click Skip to skip me sengs.
9.3 Environment
Sengs
Aer acvang the device, you should select an applicaon mode for beer device applicaon.
Steps
1.
Click in the top right of the web page to enter the wizard page. Aer seng device language
and
me, you can click Next to enter the Environment Sengs page.
2.
Select Indoor or Other.
Note
●
If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
●
If you do not congure the applicaon mode and tap Next, the system will select Indoor by
default.
●
If you acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
Click Next to save the sengs and go to the next paramater. Or click Skip to skip environment
sengs.
9.4 Privacy
Sengs
Set the picture uploading and storage parameters.
DS-K1T321 Series Face Recognion Terminal
77