User's Manual

If the card is M1 card, and if you need to enable the M1 Card Encrypon funcon, you should
enable this funcon and select the sector of the card to encrypt.
Remote Mode: Issue Card by Card Reader
Select an access control device added in the client and swipe the card on its card reader to read
the c
ard number.
7.5 Congure Schedule and Template
You can congure
the template including holiday and week schedule. Aer seng the template,
you can adopt the congured template to access groups when seng the access groups, so that
the access group will take eect in the me duraons of the template.
Note
For access group sengs, refer to Se
t Access Group to Assign Access Authorizaon to Persons .
7.5.1 Add Holiday
You can create holidays and set the days in the holidays, including start date, end date, and holiday
duraon
in one day.
Steps
Note
You can add up to 64 holidays in the soware system.
1. Click Access Con
trol → Schedule → Holiday to enter the Holiday page.
2. Click Add on the le panel.
3. Create a name for the holiday.
4. Oponal: En
ter the descripons or some nocaons of this holiday in the Remark box.
5. Add a holiday period to the holiday list and congure the holiday duraon.
Note
Up to 16 holiday periods can be added to one holiday.
1) Click Add in the Holida
y List eld.
2) Drag the cursor to draw the me duraon, which means in that duraon of me, the
congured access group is acvated.
Note
Up to 8 me
duraons can be set to one holiday period.
3) Oponal: P
erform the following operaons to edit the me duraons.
Face Recognion Terminal User Manual
91