User's Manual

Get card reader type and descripon. They are read-only.
Advanced
Enable Card Reader
Enable the funcon and e device can be used as an card reader.
OK LED Polarity/Error LED Polarity/Buzzer Polarity
Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to
the card reader parameters. Generally, adopts the default sengs.
Max. Interval When Entering PWD
When you inpung the password on the card reader, if the interval between pressing
two digits is larger than the set value, the digits you pressed before will be cleared
automacally.
Tampering Detecon
Enable the an-tamper detecon for the card reader.
Communicate with Controller Every
When the access control device cannot connect with the card reader for longer than
the set me, the card reader will turn oine automacally.
Face 1:N Matching Threshold
Set the matching threshold when authencang via 1:N matching mode. The larger the
v
alue, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Face Recognion Interval
The
me interval between two connuous face recognions when authencang. By
default, it is 2s.
Face An-spoong
Enable or disable the live face detecon funcon. If enabling the funcon, the device
c
an recognize whether the person is a live one or not.
Face 1:1 Matching Threshold
Set the matching threshold when authencang via 1:1 matching mode. The larger the
value, the smaller the false accept rate and the larger the false rejecon rate when
authencaon.
Applic
aon Mode
You can select indoor or others applicaon modes according to actual environment.
Lock Authencaon Failed Face
Aer enabling the Live Face Detecon funcon, the system will lock the user's face for
5 minutes if the live face detecon is failed for more than the congured aempts. The
Face Recognion Terminal User Manual
99