User's Manual

7.7.5 Congure Card Reader Authencaon Mode and Schedule
You can set the passing rules for the card reader of the access control device according to your
actual needs.
Perform this task if you need to congure the card reader's authencaon mode and schedule.
Steps
1. Click Access Control → Advanced Funcon → Card Reader Authencaon to enter the card
reader authencaon conguraon page.
2. Select a card reader on the le to congure.
3. Set card reader authencaon mode.
1) Click Conguraon.
Note
• Password refers to the card password set when issuing the card to the person. For details,
r
efer to Add Single Person.
• Authencaon password refers to the password set to open the door. Refer to Congure
Authencaon Password.
• The supported card reader authencaon mode varies according to dierent devices. For
details, refer to the actual product.
2) Select the modes and click to add to the selected modes list.
3) Oponal: Click or to adjust the display order.
4)
Click OK.
Aer selecng the modes, the selected modes will display as icons.
4. Click the icon to select a card reader authencaon mode, and drag on the day to draw a color
bar on the schedule, which means in that period of me, the card reader authencaon is valid.
5. R
epeat the above step to set other me periods.
6. Oponal: Select a congured day and click Copy to Week to copy the same sengs to the
whole week.
7. Oponal: Click Cop
y to to copy the sengs to other card readers.
8. Click Save.
7.7.6 Congure First Person In
You can set mulple rst persons for one access control point. Aer the rst person is authorized,
it allows mulple persons access the door or other authencaon acons.
Before You Start
Se
t the access group and apply the access group to the access control device. For details, refer to
Set Access Group to Assign Access Authorizaon to Persons .
Perform this task when you want to congure opening door with rst person.
Face Recognion Terminal User Manual
105