User's Manual

5. Set the start me and end me during which the aendance data will be displayed in the
r
eport.
6. Click Report to generate the stascs report and open it.
Custom Aendance Report
The client supports mulple report types and you can pre-dene the report content and it can
send the report automacally to the email address you congured.
Steps
Note
Set the email parameters before you want to enable auto-sending email funcons. For details,
r
efer to Set Email Parameters in the user manual of the client soware.
1. En
ter the Time & Aendance module.
2. Click Aendance Stascs → Custom Report .
3. Click Add to pre-dene a report.
4. Set the report content.
Report Name
Enter a name for the report.
Report Type
Select one report type and this report will be generated.
Report Time
The me to be selected may vary for dierent report type.
P
erson
Select the added person(s) whose aendance records will be generated for the report.
5. Oponal: Se
t the schedule to send the report to the email address(es) automacally.
1) Check the Auto-Sending Email to enable this funcon.
2) Set the eecve period during which the client will send the report on the selected sending
date(s).
3) Select the date(s) on which the client will send the report.
4) Set the me at which the client will send the report.
Ex
ample
If you set the eecve period as 2018/3/10 t
o 2018/4/10, select Friday as the sending date,
and set the sending me as 20:00:00, the client will send the report at 8 p.m. on Fridays
during 2018/3/10 to 2018/4/10.
Face Recognion Terminal User Manual
141