User's Manual

Note
• You can also change the sengs in S
ystem Sengs.
• If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
• If you do not congure the applicaon mode and tap Ne
xt, the system will select Indoor by
default.
• If you acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
6.2 Login
Login the device to set the device basic parameters. You should enter the device acvaon
password for the rst login. Or if you have add the administrator's credenal, you can login via the
congured
credenal.
6.2.1 Login For First Time
You should login the system before other device operaons.
Steps
1. Long tap on the inial page for 3 s to enter password entering page.
2. Tap the Password eld and enter the device
acvaon password.
3. Tap OK to enter the home page.
Note
• The device will be locked for 30 minutes aer 5 failed password aempts.
• For details about seng the administrator authencaon mode, see Adding User.
Face Recognion Terminal User Manual
30