User's Manual

Enable Administrator Permission
The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Disable Administrator Permission
The User is the normal user. The user can only authencate or take aendance on the inial
page.
7. Tap to save the sengs.
6.4.5 Set Authencaon Mode
Aer adding the user's face picture, password, or other credenals, you should set the
authencaon mode and the user can authencate his/her identy via the congured
authencaon mode.
Steps
1. Long tap on the inial page and login.
2. Tap User → Add User/Edit User → Authencaon Mode .
3. Select Device or Custom as the authencaon mode.
De
vice
If you want to select device mode, you should set the terminal authencaon mode in
Access Control Sengs page rst. For details see Seng Access Control Parameters.
Custom
You can combine dierent
authencaon modes together according to your actual needs.
4. Tap
to save the
sengs.
6.4.6 Search and Edit User
Aer adding the user, you can search the user and edit it.
Search User
On the User Management page, Tap the search area to enter the Search User page. Tap Car
d on
the le of the page and select a search type from the drop-down list. Enter the employee ID, card
No., or the user name for search. Tap
to search.
Edit User
On the User Management page, select a user from the user list to enter the Edit User page. Follow
the s
teps in User Management to edit the user parameters. Tap
to save the sengs.
Note
The employee ID cannot be edited.
Face Recognion Terminal User Manual
43