User's Manual

1) Select Check In, Check Out, Break Out, Break In, Overme In, or Overme Out as the
aendance status.
2) Tap Schedule.
3) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.
4) Tap the select date and set the selected aendance status's start me.
5) Tap Conrm.
6) Repeat step 1 to 5 according to your actual needs.
Note
The
aendance status will be valid within the congured schedule.
4. T
ap
.
R
esult
When you authencate on the inial page, the authencaon will be marked as the congured
aendance status according to the congured schedule.
Example
If set the Break Out Schedule as Monday 11:00, and Break In Schedule as Monday 12:00, the valid
user's authencaon from Monday 11:00 to 12:00 will be marked as break.
6.10.3 Set Manual Aendance via Device
Set the aendance mode as manual, and you can select a status manually when you take
aendance.
Before You Start
Add a
t least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Aendance Mode as Manual.
Figure 6-20 Manual Aendance Mode
Face Recognion Terminal User Manual
59