User's Manual

Note
For details about adding device, see Add De
vice.
5. Se
t the master staon's IP address and SIP address in the remote conguraon page.
Note
For details about the operaon, see the user manual of the master staon.
6. T
ap
→ t
o call the center.
7. Answers the call via the master staon and starts two-way audio.
Note
The device will call the master staon in priority.
6.12.3 Call Device from Client Soware
Steps
1. Ge
t the client soware from the supplied disk or the ocial website, and install the soware
according to the prompts.
2. Run the clien
t soware and the control panel of the soware pops up.
3. Click Device Management to enter the Device Management page.
4. Add the device to the client soware.
Note
For details about adding device, see Add De
vice.
5. En
ter the Live View page and double-click the added device to start live view.
Note
For details about operaons in the Liv
e View page, see Live View in the user manual of the
client soware.
6. Righ
t click the live view image to open the right-click menu.
7. Click Start Two-Way Audio to start two-way audio between the device and the client soware.
6.12.4 Call Room from Device
Steps
1. Ge
t the client soware from the supplied disk or the ocial website, and install the soware
according to the prompts.
2. Run the client soware and the control panel of the soware pops up.
3. Click De
vice Management to enter the Device Management interface.
4. Add the indoor staon and the device to the client soware.
Face Recognion Terminal User Manual
65