User's Manual

The searched online devices are displayed in the list.
4. Select mulple devices.
Note
For the inacve
device, you need to create the password for it before you can add the device
properly. For details, refer to .
5. Click Add t
o open the device adding window.
6. Enter the required informaon.
User Name
B
y default, the user name is admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
y
ou change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you change your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7. Oponal: Check S
ynchronize Time to synchronize the device me with the PC running the client
aer adding the device to the client.
8. Oponal: Check Import t
o Group to create a group by the device name, and import all the
channels of the device to this group.
Example
For access control device, its access points, alarm inputs/outputs, and encoding channels (if
exist) will be imported to this group.
9. Click Add to add the devices.
Add Device by IP Address or Domain Name
If you know the IP address or domain name of the device to add, you can add devices to the client
b
y specifying the IP address (or domain name), user name, password, etc.
Steps
1. Enter Device Management module.
2. Click Device tab on the top of the right panel.
The added devices are displayed on the right panel.
Face Recognion Terminal User Manual
70