User's Manual

3) Click OK to save the captured photo.
7. Conrm to add the person.
-
Click Add t
o add the person and close the Add Person window.
-
Click Add and New to add the person and connue to add other persons .
7.4.7 Congure Access Control Informaon
When adding a person, you can set her/his access control properes, such as seng the person as
a visitor or a blacklist person, or as a super user who has super authorizaon.
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add.
3. In the Access Con
trol area, set the person's access control properes.
Access Group
You can select one or more access groups for the person to give him/her the authorizaon to
the selected access points. For details, refer to Set Access Group to Assign Access
Authorizaon to Persons .
Password
The person must enter the password aer swiping the card or ngerprint when accessing. It
c
annot be used independently and should contain 4 to 8 digits.
Super User
If the person is set as a super user, he/she will have authorizaon to access all the doors/
oor
s and will be exempted from remaining closed restricons, all an-passback rules, and
rst person authorizaon.
Extended Door Open Time
When the person accessing door, grant this person more me to pass through doors which
ha
ve been congured with extended open duraon. Use this funcon for the persons with
reduced mobility.
For details about seng the door's open duraon, refer to Congure Parameters for Door .
Add to Blacklist
Add the person to the blacklist and when the person tries to access doors/oors, an event
will be trig
gered and send to the client to nofy the security personnel.
Mark as Visitor
If the person is a visitor, set the maximum mes of authencaons, including access by card
and ngerprint to limit the visitor's access mes.
Note
The maximum mes of authencaons should be between 1 and 100.
Face Recognion Terminal User Manual
83