User's Manual

2.
Tap OK to save.
Note
●
You can also change the sengs in System Sengs.
●
If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
●
If you do not
congure the applicaon mode and tap Next, the system will select Indoor by
default.
●
If you
acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
6.4 Set Network Parameters
Aer acvaon and select applicaon mode, you can set the network for the device
Steps
1.
When you enter the Select Network page, tap Wired Network or Wi-Fi for your actual needs.
Figure 6-4 Select Network
Note
Disconnect the wired network before connecng a Wi-Fi.
2.
Tap Next.
DS-K1T6QT-F43 Series Face Recognion Terminal User Manual
28