Video Intercom Door Station (V Series) User Manual UD.
Video Intercom Door Station·User Manual User Manual ©2015 Hangzhou Hikvision Digital Technology Co., Ltd. This user manual is intended for users of the models below: Series Model DS-KV8102-IM DS-KV8202-IM Door Station (V Series) DS-KV8402-IM DS-KV8102-IP DS-KV8102-VP It includes instructions on how to use the Product. The software embodied in the Product is governed by the user license agreement covering that product.
Video Intercom Door Station·User Manual FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
Video Intercom Door Station·User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Video Intercom Door Station·User Manual 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.
Video Intercom Door Station·User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions: Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Warnings Follow these safeguards to prevent serious injury or death.
Video Intercom Door Station·User Manual Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.
Video Intercom Door Station·User Manual Table of Contents 1 Overview ...................................................................................................... 1 1.1 Introduction ............................................................................................................. 1 1.2 Main Features .......................................................................................................... 1 2 Appearance ...................................................................
Video Intercom Door Station·User Manual 8.3.2 Adding by IP Address or IP Segment. .............................................................. 28 8.4 Remote Configuration ........................................................................................... 29 8.4.1 System ............................................................................................................. 29 8.4.2 Video Intercom ................................................................................................
Video Intercom Door Station·User Manual 1 Overview 1.1 Introduction The door station (V series) can realize functions such as video intercom, access control, one-card system, zone alarm, and visitor messages to form a complete smart community video intercom solution. The door station (V series) is mainly applied in the villa, and can works as door station, outer door station, and doorphone. 1.2 Main Features Video intercom function HD video surveillance (Max.
Video Intercom Door Station·User Manual 2 Appearance 2.1 Appearance of DS-KV8X02-IM For device DS-KV8X02- IM, the number of calling buttons varies according to its model. Take the figure of device DS-KV8402-IM as an example. For device DS-KV8102-IM, there is only 1 calling button. For device DS-KV8202-IM, there are 2 calling buttons. For device DS-KV8402-IM, there are 4 calling buttons.
Video Intercom Door Station·User Manual Models No. Description 7 Microphone 8 Tamper Button You need not customize the Room No. for device DS-KV8102-IM. 2.2 Appearance of DS-KV8102-XP 1 2 3 4 5 Figure 2-2 Appearance of DS-KV8102-XP Table 2-2 Description of DS-KV8102-XP Models DS-KV8102-IP DS-KV8102-VP No.
Video Intercom Door Station·User Manual 3 Typical Application 3.1 Typical Application of DS-KV8X02-IM Please refer to the following figure for typical application of DS-KV8102-IM/ DS-KV8202-IM/ DS-KV8402-IM door station.
Video Intercom Door Station·User Manual DS-KV8102-IP/ DS-KV8102-VP door station can also work as doorphone both in a villa or an apartment. Please refer to the typical application (2) and the typical application (3).
Video Intercom Door Station·User Manual In typical applicatin (2), DS-KV8102-IP/ DS-KV8102-VP door station and DS-KV8102-IM door station work as doorphone in a villa.
Video Intercom Door Station·User Manual 4 Terminals and Interfaces of Wiring Please refer to the following figure for terminals and interfaces of door station. ①-⑤ ⑥-⑦ ⑧-⑨ ⑩-⑫ ⑬ Figure 4-1 Terminals and Interfaces Table 4-1 Descriptions of Terminals and Interfaces Terminals and Interfaces Name ALARM IN No.
Video Intercom Door Station·User Manual 5 Installation and Wiring 5.1 Installation of DS-KV8X02-IM To install the door station onto the wall, you are required to utilize a matched gang box. 5.1.1 Gang Box for DS-KV8X02-IM Please refer to the following figures for the dimensions of gang box for DS-KV8102-IM/ DS-KV8202-IM/ DS-KV8402-IM door station. 97 73.
Video Intercom Door Station·User Manual 5.1.2 Wall Mounting with Gang Box of DS-KV8X02-IM Steps: 1. Take the gang box and screws from the packing box. 2. Chisel a hole in the wall for inserting the gang box. The size of the hole should be 90 (width) ×170 (length) × 38(depth) mm. 3. Insert the gang box into the hole and fix it with 4 PA4 screws, as shown in the figure below. PA4 Screws Figure 5-2 Insert the Gang Box (DS-KV8X02-IM) 4.
Video Intercom Door Station·User Manual M4 Screw Figure 5-4 Secure the Door Station (DS-KV8X02-IM) 5.2 Installation of DS-KV8102-XP 5.2.1 Installation Plate for DS-KV8102-XP To install the DS-KV8102-XP model onto the wall, an installation plate and a gang box are required. Hollow Area 41.48 20 91.6 69 18 9.3 72.
Video Intercom Door Station·User Manual The dimension of gang box for model DS-KV8102-IP/ DS-KV8102-VP door station is: 75 (width) × 75 (length) × 50 (depth) mm. The dimensions above are theoretical. The actual size can be slightly different from the theoretical dimension. 5.2.2 Wall Mounting with Gang Box of DS-KV8102-XP Steps: 1. Take the gang box, installation plate and screws from the packing box. 2. Chisel a hole in the wall for inserting the gang box.
Video Intercom Door Station·User Manual 6. After installing the installation plate, install the door station by inserting the rear component into the hollow area of the installation plate. While inserting the door station into the installation plate, incline the device by 5~10°, as shown in the figure below. Hollow Area Rear Component Figure 5-8 Install the Door Station (DS-KV8102-XP) 7. Secure the door station by inserting the fixing screw according to the direction of the arrow of the figure below.
Video Intercom Door Station·User Manual 5.3 Wiring Description 5.3.1 Door Lock Wiring Figure 5-10 Door Lock Wiring Terminal DR_NC/DR_COM is set as default for connecting magnetic lock/electric bolt; terminal DR_NO/DR_COM is set as default for connecting electric strike. To connect electric lock, it is required to set the output of terminal DR_NC/DR_COM/DR_NO to be electric lock with Batch Configuration Tool or iVMS-4200 client software.
Video Intercom Door Station·User Manual 5.3.2 Door Magnetic Wiring Figure 5-11 Door Magnetic Wiring To connect door magnetic, it is required to set the input of one alarm in terminal (ALARM_1, ALARM_2, ALARM_3, or ALARM_4) to be door magnetic with Batch Configuration Tool or iVMS-4200 client software. 5.3.
Video Intercom Door Station·User Manual To connect exit button, it is required to set the input of one alarm in terminal (ALARM_1, ALARM_2, ALARM_3, or ALARM_4) to be exit button with Batch Configuration Tool or iVMS-4200 client software. 5.3.
Video Intercom Door Station·User Manual 6 Before You Start For the first time use of the device, you are required to activate the device. You can activate the device and set the device password via internet with Batch Configuration Tool, or with iVMS-4200 client software, or with Video Intercom Set-up Tool. To activate the device with Video Intercom Device Set-up Tool, refer to Chapter 7. To activate the device with Batch Configuration Tool or iVMS-4200, refer to Chapter 8 and Chapter 9. Please refer to 8.
Video Intercom Door Station·User Manual 7 Video Intercom Device Set-up Tool Purpose: You can assign the device to the community, active and set the device by using the video intercom device set-up tool. 7.1 Setting a Community Structure Purpose: You can set a community structure, based on the real community situation, on the video intercom device set-up tool, and then assign devices to the community accordingly.
Video Intercom Door Station·User Manual Figure 7-2 Project Settings 3. Click the Apply button to enable the settings. The default amount of project is 1 if the amount is not set in the textbox. 7.1.2 Setting Community Steps: 1. Check the checkbox of a certain project from the community structure. 2. Select Community from the drop-down list and enter a number in the textbox to set the amount of community. Figure 7-3 Community Settings 3. Click the Apply button to enable the settings.
Video Intercom Door Station·User Manual If you check the checkbox of All, then all projects in the community structure will be selected, and will be added the same amount of community. 7.1.3 Setting Building Steps: 1. Check the checkbox of a certain community from the community structure. 2. Select Building from the drop-down list and enter a number in the textbox to set the amount of building. Figure 7-4 Building Settings 3. Click the Apply button to enable the settings.
Video Intercom Door Station·User Manual Figure 7-5 Floor Settings 3. Click the Apply button to enable the settings. If you check the checkbox of All, then all buildings in the community structure will be added the same amount of floor. If you check the checkbox of a certain project, then all buildings in the selected project will be added the same amount of floor. If you check the checkbox of a certain community, then all buildings in the selected community will be added the same amount of floor.
Video Intercom Door Station·User Manual 3. Click the Apply button to enable the settings. If you check the checkbox of All, then all floors in the community structure will be selected, and will be added the same amount of room. If you check the checkbox of a certain project, then all floors in the selected project will be added the same amount of floor. If you check the checkbox of a certain community, then all floors in the selected community will be added the same amount of floor.
Video Intercom Door Station·User Manual 4. Set the main door station floor No.. 5. Enter the SIP IP address, master station IP address, center IP address, center port No., subnet mask, and gateway address. 6. Click the Refresh button to view the online indoor station of the same segment. 7. Select a door station and enter the login password. 8. Click the Set button to accomplish the settings of main door station. Figure 7-8 Main Door Station Settings Interface The default main door station floor No.
Video Intercom Door Station·User Manual You can activate the online sub door station, and configure the number of online sub door station. Before You Start: Press the Sub Door Station tab to switch to the sub door station settings. Steps: 1. Select the community to configure the numnber for the sub door station. Figure 7-9 Selecting Community 2. Set the sub door station floor No.. 3. Set the sub door station amount. 4. Enter the sub door station start IP address. 5.
Video Intercom Door Station·User Manual Figure 7-10 Sub Door Station Settings Interface The default sub door station floor No. is 1. The sub door station amount should be no higher than 8. You can select one project or multiple projects; one community or multiple communities; one building or multiple buildings. The Sub Door Station IP Address is usually set to be the same as Start IP Address of sub door station.
Video Intercom Door Station·User Manual 8 Batch Configuration Tool 8.1 Activating Device Remotely Purpose: The device cannot be operated until it is activated. You can remotely activate the device via Batch Configuration Tool or via iVMS-4200 client. Here take the Batch Configuration Tool as example, and for further information, please refer to the user manual in the disk. Steps: 1. Run the software, and select the inactivated device from the online devices and click the Activate button.
Video Intercom Door Station·User Manual When the device is not activated, the basic operation and remote operation of device cannot be performed. 8.2 Editing Network Parameters Purpose: You can edit the network parameters of online devices. Steps: 1. Select an online device in the online devices list in the lower part of the batch configuration software interface. 2. Click the Edit NET Parameters button. Figure 8-2 Edit NET Parameters 3. Enter a new IP address, subnet mask, gateway address, port No.
Video Intercom Door Station·User Manual 8.3 Adding Device The software provides 3 ways for adding the door station (V series). You can add the active online devices within your subnet, add devices by IP address, and add devices by IP segment. 8.3.1 Adding Online Devices Steps: 1. Run the software to enter the main interface of video intercom batch configuration tool software. Figure 8-4 Main Interface of Batch Configuration Software 2.
Video Intercom Door Station·User Manual Figure 8-6 Login Dialog Box 4. Enter the user name and password. 5. Click the OK button to save the settings. Only the devices that are successfully logged in will be added to the device list for configuration. 8.3.2 Adding by IP Address or IP Segment. Click the button to pop up the adding devices dialog box. Figure 8-7 Adding Button Adding by IP Address Purpose: You can add the device by entering IP address. Steps: 1.
Video Intercom Door Station·User Manual Adding by IP Segment Purpose: You can add many devices at once whose IP addresses are among the IP segment. Steps: 1. Select IP Segment in the adding mode drop-down list. 2. Set the Start IP Address and End IP Address. 3. Enter port No., user name, and password. Figure 8-9 Adding by IP Segment 4. Click the OK button to search and add the devices whose IP addresses are within the range of the defined IP segment to the device list. 8.
Video Intercom Door Station·User Manual Device Information Click the Device Information button to enter device basic information interface. You can view basic information (the device type, and serial No.), and version information of the device. Figure 8-11 Device Information Interface General Click the General button to enter device general parameters settings interface. You can view and edit the device name and device ID. Figure 8-12 Device General Parameters Settings Interface Time Steps: 1.
Video Intercom Door Station·User Manual 1) Check the checkbox of Enable NTP to enable NTP. 2) Enter the server address, NTP port, and synchronization interval. 3. Click the Apply button to save and realize the time settings. The default Port No. is 123. System Maintenance Purpose: You can operate the system management and remote upgrading on the system maintenance interface. Steps: 1. Click the System Maintenance button to enter the system maintenance interface. Figure 8-14 System Maintenance Interface 2.
Video Intercom Door Station·User Manual 2) • 1) 2) • 1) 2) • 1) Figure 8-15 Reboot Click the Yes button to reboot the system. Restore Default Settings Click the Restore Default Settings button to pop up the restore default settings dialog box. Figure 8-16 Restore Default Settings Click the Yes button to restore the default parameters. Restore All Click the Restore All button to pop up the restore all settings dialog box.
Video Intercom Door Station·User Manual 2) 3) Figure 8-18 Import Configuration File Window Select the path of remote configuration files. Click the Open button to import the remote configuration file and pop up a reboot information dialogue box. • 1) Figure 8-19 Reboot Information Export Configuration File Click the Export Configuration File button to pop up the export file window. 2) Figure 8-20 Export Configuration File Window Select the save path of remote configuration files.
Video Intercom Door Station·User Manual 3) Click the Save button to export the configuration file, and pop up an information box for exporting. Figure 8-21 Information Box for Exporting Remote Upgrade • Reboot 1) Click the button to pop up the window for opening upgrade file. 2) 3) Figure 8-22 Window for Opening Upgrade File Select the upgrade file, and click the Open button. Click the Upgrade button to remotely upgrade the device.
Video Intercom Door Station·User Manual Figure 8-24 User Information Editing Interface 2. Select the user to edit and click the Modify button to enter the user parameter interface. Figure 8-25 User Parameter Interface 3. Enter the new password, and confirm it. 4. Click the Apply button to realize the editing of password. The new password and confirm password should be identical. After editing the password of device, click button from the device list, the added device will not be there.
Video Intercom Door Station·User Manual Figure 8-26 RS485 Parameters RS485 configuration is reserved in this version. 8.4.2 Video Intercom Device Number Configuration Steps: 1. Click the Device Information button to enter device number configuration interface. Door Station 1) Select door station from the drop-down list of the device type Figure 8-27 Device Number Configuration (V Series Door Station) Enter the project No., community No., building No., floor No., and serial No.
Video Intercom Door Station·User Manual Figure 8-28 Device Number Configuration (Doorphone) 2) Select Yes or No from the drop-down list menu of auto login. 1. Click the Apply button to enable the device number configuration. For V series door station, the default serial No. is 0. When the serial No. is 0, the device is main door station, and when the serial No. is larger than 0, the device is sub door station. The serial No. is numeric from 1 to 99.
Video Intercom Door Station·User Manual Access Control and Elevator 1. Click the Access Control and Elevator button to enter password changing interface. Figure 8-30 Access Control and Elevator Settings Interface 2. Set corresponding parameters on the access control and elevator settings interface. Access Control 1) Select the door No.. 2) Set the door-unlocked duration. 3) Click the Apply button to enable the settings. Elevator Control 1) Select the elevator No., interface, RS485 protocol.
Video Intercom Door Station·User Manual Figure 8-31 I/O Input and Output Interface 2. Select I/O input No., input mode, I/O output No., and output mode. 3. Click the Apply button to enable the settings. There are 4 I/O Input Terminals, Terminal 1~4 correspond to ALARM_1~ALARM_4 interfaces of door station. You can enable/disable IO In or set IO In as door magnetic or door switch by selecting from the dropdown list.
Video Intercom Door Station·User Manual Figure 8-33 Calling Buttons Interface 2. Select the button number. 3. Enter the floor No. and the room No.. 4. Click the Apply button to enable the settings. For DS-KV8102-IM, DS-KV8102-IP, and DS-KV8102-VP, there is no need setting the Room No.. 8.4.3 Network Local Network Configuration Steps: 1. Click the Local Network Configuration button to enter the local network configuration interface. Figure 8-34 Local Network Configuration Interface 2.
Video Intercom Door Station·User Manual Linked Devices Network Configuration Purpose: On the linked devices network configuration interface, you can configure the network parameters of master stations, SIP servers and management centers of the same LAN. Steps: 1. Click the Linked Device Network Configuration button to enter the devices network configuration interface. Figure 8-35 Linked Devices Network Configuration Interface 2. Select the device type from the drop-down list. 3.
Video Intercom Door Station·User Manual Figure 8-36 FTP Parameters Interface 2. Check the checkbox of Enable Main FTP. 3. Select IP address from the drop-down list of server mode. 4. Enter the FTP server address, and port No.. 5. Check the checkbox to enable the anonymity (optional). 6. Enter the name and password. 7. Select the directory structure and set the separator, naming item, and naming element. 8. Click the Apply button to enable the FTP parameters settings. The default port No. is 21.
Video Intercom Door Station·User Manual Figure 8-37 Video Parameters Interface 2. Select the channel No. 3. Select the resolution, frame rate, and video format. 4. Select to enable/disable WDR. 5. Set the WDR level. 6. Set the brightness, hue, contrast, saturation, and sharpness of the video. 7. Click the Apply button to enable the settings. Click the Restore Default Settings button to restore all parameters excluding network parameters to the factory settings.
Video Intercom Door Station·User Manual 9 Setting the Door Station via iVMS-4200 9.1 System Configuration After running the iVMS-4200, enter Control Panel -> Maintenance and Management -> System Configuration -> Video Intercom to configure the video intercom parameters accordingly. You can configure the ringtone, Max. ring duration, Max. speaking time with indoor station and Max. speaking time with door station. Figure 9-1 System Configuration Interface 9.
Video Intercom Door Station·User Manual 9.3 Live View of Device Steps: 1. Enter the main view interface of iVMS-4200 client software to display the live view of door station (V Series). Figure 9-2 Live View of Door Station (V Series) 2. Right click on the live view interface to display the menu and select Unlock Door to remote unlock the door.
Video Intercom Door Station·User Manual 9.4 Picture Storage on Storage Server 9.4.1 Adding Storage Server Purpose: When the device is under armed status, it will capture the picture automatically after unlocking the door. The captured picture can be uploaded and stored in the storage server. Before you start: The storage server application software needs to be installed and it is packed in the iVMS-4200 software package.
Video Intercom Door Station·User Manual Figure 9-5 Storage Sever Interface You can add the storage server by referring to Section 8.3 Adding Device. This function does not apply to the doorphone. 9.4.2 Formatting the HDDs The HDDs of the storage server need to be formatted for the captured picture storage. Steps: 1. Select the added storage server from the list and click Remote Config. 2. Click Storage->General to enter the HDD Formatting interface. 3. Select the HDD from the list and click Format.
Video Intercom Door Station·User Manual Figure 9-6 Remote Configuration Interface of Storage Server Formatting the HDDs is to pre-allocate the disk space for storage and the original data of the formatted HDDs will not be deleted. 9.4.3 Configuring Storage Server Picture Storage Before you start: The storage server needs to be added to the client software and the HDDs need to be formatted for the captured pictures storage. Steps: 1. Open the Record Schedule page. 2.
Video Intercom Door Station·User Manual Figure 9-7 Record Schedule Settings 5. Click Set Quota to enter the HDD management interface of the storage server. You can set the corresponding quota ratio for captured picture information. Figure 9-8 Storage Settings Example: If you set the picture quota as 60%, then the 60% of the storage space can be used for storing the captured pictures. 6. Click Save to save the settings. 9.
Video Intercom Door Station·User Manual You can add groups to community, outer door station, or other, and assign devices to each group. 9.5.1 Adding Group 1. Click the Group Management tab to enter the group management interface. Figure 9-9 Group Management Interface 2. Click the button on the right group list to pop-up group adding dialog box. 3. Select a kind of group type. Selecting Building as Group Type Figure 9-10 Group Adding Interface (Building) 1) Check the checkbox of building.
Video Intercom Door Station·User Manual Figure 9-11 Group Adding Interface (Outer Door Station) 1) Check the checkbox of outer door station. 2) Enter the project No.. Selecting Other as Group Type Figure 9-12 Group Adding Interface (Other) 1) Check the checkbox of other. 2) Enter the name. 4. Click the OK button to complete the group adding settings. Groups that have been successfully added will be automatically listed in the group list according to different group types.
Video Intercom Door Station·User Manual Figure 9-13 Resident Adding Interface 2. Check the checkbox of device and enter the Room No. of indoor stations to assign the device to the community. 3. Click the OK button to save the settings. 9.5.3 Modifying Device Information 1. Select an added device. 2. Click the Modify button to enter the device modifying interface. Figure 9-14 Device Modifying Interface 3. Click the OK button to complete the device modifying operation. 9.5.4 Deleting Device 1.
Video Intercom Door Station·User Manual Figure 9-15 Group Deleting Interface 3. Click the OK button to complete the group deleting operation. 9.6 Card Management Purpose: You can add unauthorized cards to the community and then you can assign the cards to the corresponding indoor station and outdoor stations. For example, if there are 3 residents living in Room 401, you can assign 3 cards to No. 401 indoor Station.
Video Intercom Door Station·User Manual 3. Select card type: Resident Card, Other Card. 4. Enter Start Card No. and End Card No. (adding in batch), or enter card No. (adding by single or card reader). Figure 9-17 Adding in Batch Figure 9-18 Adding by Single or Card Reader 5. Click the OK button to save the settings. Two card types are recommended. Resident card is used by residents living in the community, and other card is used by visitors (guest, serviceman, etc.) in the community. Issuing Card 1.
Video Intercom Door Station·User Manual 2. Issue Resident Card or Other Card. Issuing Resident Card 1) Select Community on the left and the indoor stations of the community will be listed in the resident list. Figure 9-20 Resident Card Issuing Interface 2) Click the button to pop up card selection interface for selecting unauthorized cards to be issued to the indoor station.
Video Intercom Door Station·User Manual 1) Select Other on the left group list and the name for other card issuing will be listed in the right list. Figure 9-22 Other Card Issuing Interface 2) Click the button to pop up card selection interface for selecting unauthorized cards to be issued to the indoor station.
Video Intercom Door Station·User Manual Deleting Card Deleting Unauthorized Card 1) On the card management interface (Figure 8-11), check the checkbox(ex) of unauthorized card(s). 2) Click the Delete Card button to pop up unauthorized card deleting box. Figure 9-24 Card Deleting Information Box 3) Click the OK button to delete the card(s). Deleting Issued Card 1) On the resident/other card issuing interface (Figure 8-15, Figure 8-17), select a community group or an Other group.
Video Intercom Door Station·User Manual Figure 9-25 Bath Import Interface 2. Click the Export Template button to export the template of the batch import file. Figure 9-26 Template File Exporting Interface 3. Fill in the template of the batch import file and click the Save button to save it. 4. Click the button to select the batch import file.
Video Intercom Door Station·User Manual 5. Click the Open button. 6. Click the OK button to start importing the batch import file. Exporting Unauthorized Cards in Batch 1. Click the Batch Export button after adding unauthorized cards. Figure 9-28 Batch Export Interface 2. Select the saving file path and click the Save button. 3. Generate an excel file in the saving directory after exporting unauthorized cards in batch. 9.6.
Video Intercom Door Station·User Manual To issue cards with card issuer, please connect the card reader DS-K1F100-D8 (purchased separately) to PC via USB interface. Open iVMS-4200 and enter the directory of Video Intercom->Card Management->Unauthorized Card->Add Card. Swipe the unauthorized card in turn and the card No. will be read and added to the device automatically. After issuing each card via iVMS-4200, the device plays the voice prompt: Issuing card finished 9.7 Notice Management 9.7.
Video Intercom Door Station·User Manual Figure 9-31 Tool Menu 2. Set the arming status of the device as armed, and the alarm information will be auto uploaded to the client software when alarm occurs Figure 9-32 Device Arming Control Figure 9-33 Alarm Events After adding the device to the client software, it will be armed automatically.
Video Intercom Door Station·User Manual 10 Local Operation 10.1 Calling Resident 10.1.1 Calling Resident (DS-KV8X02-IM) You can call the resident by pressing the calling button. For device DS-KV8X02- IM, the number of calling buttons varies according to its model. Take the figure of device DS-KV8402-IM as an example. For device DS-KV8102-IM, there is only 1 calling button. For device DS-KV8202-IM, there are 2 calling buttons. For device DS-KV8402-IM, there are 4 calling buttons.
Video Intercom Door Station·User Manual When live view of door station is displayed on other devices or door station is calling resident, the door station will detect the brightness of video. When the brightness is lower than the expected threshold, the supplement light will be enabled.
Video Intercom Door Station·User Manual When the supplement light is enabled, the backlight of key will be auto-enabled, otherwise, the door station will detect the brightness of live view and enable the backlight of key when the brightness of live view is lower than expected threshold. 10.2 Issuing Card Purpose: You can assign the card to the door station or doorphone by issuing cards. You can issue cards by swiping the main card with the door station, or issue the card with iVMS-4200 client software.
Video Intercom Door Station·User Manual You cannot unlock the door by swiping the main card.
Video Intercom Door Station·User Manual Appendix Installation Notice While installing the door station, please make sure that the distance between any two devices is far as possible to avoid the howling and echo. The distance between two devices is recommended to be longer than 10 meters. Devices here refer to indoor station, door station, doorphone and master station. Wiring Cables Cable Specification Power Cord of Door Station RVV 2*1.
Video Intercom Door Station·User Manual Model Parameters DS-KV8102-IM Resolution 1280 × 720 Video Frame 25 fps DS-KV8202-IM DS-KV8402-IM Audio Parameters Audio Input Built-in Omnidirectional Microphone Audio Output Audio Compression Standard Audio Compression Rate Audio Quality Built-in Loudspeaker G.
Video Intercom Door Station·User Manual Model Parameters DS-KV8102-IM I/O Output 1 Other Parameters Indoor Station Access Amount Material 1 Power Supply Consumption Working Temperature Working Humidity DS-KV8202-IM DS-KV8402-IM 2 4 Aluminum Ally Power Over Network Cable (DS-KAD606, DS-KAD612)/12 VDC ≤10 W - 40° C to + 70°C (-40° F to 158° F) 10% to 90% IP Protection Level IP65 Dimension 182 mm × 100 mm × 33 mm (7.17" × 3.94" × 1.
Video Intercom Door Station·User Manual Model Parameters Audio Compression Standard Audio Compression Rate Audio Quality DS-KV8102-IP DS-KV8102-VP G.
Video Intercom Door Station·User Manual Model Parameters Working Temperature Working Humidity DS-KV8102-IP DS-KV8102-VP -40° C to +70° C (-40° F to 158° F) 10% to 90% IP Protection Level IP65 Dimension 164 mm × 97 mm × 40.6 mm (6.46" × 3.82" × 1.
Video Intercom Door Station·User Manual 71
