Nameplate Camera User Manual
Please scan the below QR codes to get the initiatives on the use of video products, safety instructions, and communication matrix. Initiatives Safety Instructions Communication Matrix © 2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only.
FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK.
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Button Description Indicator Description ●When the device is off, hold it until the power ●Flashing red (fast): indicator changes to red, Device exception (low and the device starts up. battery, storage ●When the device is on, exception, storage full, hold it until the power etc.). indicator is off, and the ●Flashing red (slowly): On/Off device shuts down. Power The device is being button ●When the device is on, indicator charged.
back plate to clip the device on your clothing, and use the magnetic plate to fix the device. Keep your clothing flat when wearing the device to avoid affecting the recording effect. 3 Device Operation via Mini AI Assistant 3.1 Add Device You can scan the below QR codes to get and install the Mini AI Assistant application, and then add a device to set. Android iOS Steps 1. When the device is on, hold the Wi-Fi button to enable the Wi-Fi AP. 2.
● If the mobile terminal is not connected to the Wi-Fi AP after 3 minutes, the Wi-Fi AP will automatically turn off. If you want to connect to the Wi-Fi AP, you can hold the Wi-Fi button again to enable the Wi-Fi AP. 3. Open the Mini AI Assistant. The connected device will display on the device list, and its status will be “Online”. What to do next You can select the connected device to view, operate, and set. See the Mini AI Assistant for details. 3.
