Body Camera User Manual UD.
Body Camera User Manual User Manual COPYRIGHT © 2016 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
Body Camera User Manual Regulatory information FCC information FCC compliance: Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Body Camera User Manual This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
Body Camera User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Body Camera User Manual Applicable Models This manual is applicable to the models listed in the following table. Series Model DS-MH2111/32G DS-MH2111 Series DS-MH2111/32G/GLF Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Body Camera User Manual TABLE OF CONTENTS TABLE OF CONTENTS .................................................................................................................................. 6 Chapter 1Introduction................................................................................................................................ 8 1.1 Package List ..................................................................................................................................... 8 1.
Body Camera User Manual 7.2 Device Login................................................................................................................................... 30 7.3 Password Recovery ........................................................................................................................ 31 7.4 Media Information ......................................................................................................................... 32 7.5 7.4.
Body Camera User Manual Chapter 1 Introduction Purpose: Body camera is a video recording system that is typically used by law enforcement to record their interactions with the public and gather video evidence at crime scenes. 1.1 Package List Following objects are delivered with package list. If something loses, contact us or our supplier for it. 1 * Body camera. 1 * USB data cable. 1 * Charger.
Body Camera User Manual Table 1. 1 Buttons’ Description No. Button Description 1 Recording Hold down it to start/stop recording. Hold down it for 3 seconds to turn on IR positioning light. Press it to start/stop taping. Hold down it for 3 seconds to turn on/off fluorescent. 2 Taping 3 USB interface USB interface. 4 HDMI interface HDMI interface. 5 Sleep/Wake Press it to start up. Hold down the button at the top right corner for 3 seconds to turn on.
Body Camera User Manual 1.3 SIM Card Installation Purpose: The DS-MH2111/32G/GLF series body camera supports 3G/4G wireless network. You need to install SIM card before dialing. Steps: 1. SIM card slot locates at the bottom of body camera. Open the cover to show the SIM card slot. Figure 1. 2 Open the Cover 2. Insert the SIM card into the slot bottom with the gold area facing upwards. Figure 1. 3 Insert SIM Card 3. Close the cover to finish installation. Figure 1. 4 Close the SIM Card 1.
Body Camera User Manual Push the shoulder clip into top of the clip slot as the direction shown in the following figure, till you hear a click sound. Figure 1. 5 Install Shoulder Clip To uninstall clip, do following steps: 1) Press and hold the stick as the direction 1 shown in the following figure. 2) Push the shoulder clip down as the direction 2 to separate it from body camera. Figure 1. 6 Uninstall Shoulder Clip 1.5 Charging 1.5.1 Charger Specification Input: 200 to 240 V AC, 50/60 Hz, 0.
Body Camera User Manual Figure 1. 7 Open the Cover 2. Connect body camera to the charger or USB port of computer with the USB data cable. The LCD will show the charging status. The charging status via charger or computer is different. Figure 1. 8 Charging via Charger Figure 1. 9 Charging via Computer 1.5.3 How to Protect Charger Once charging completed, disconnect the connection between charger and body camera, and the connection between charger and power supply. Handle with care.
Body Camera User Manual Chapter 2 Start-up 2.1 Start-up Before you start: Ensure the power is sufficient. If not, charge body camera. For details, refer to 1.4 Shoulder Clip Installation/Uninstallation. Step: Press the Sleep/Wake button. After this the LED (3) turns green, the HIKVISION logo pops up in LCD, and you will hear an audio notification. All of these indicate the body camera starts successfully. 2.
Body Camera User Manual Chapter 3 Basic Functions 3.1 Live View Icons Purpose: Once the body camera starts up completely, it automatically enters the live view image. 11 icons are shown in live view. Figure 3. 1 Live View Icons Table 3. 1 Live View Icons Description Number 1 2 Name Recording status Remaining recording time Description Shows the recording status. Not recording: Recording: The time is variable and is decided by video resolution, frame rate, and bitrate.
Body Camera User Manual Number Name Description Succeeded: 8 Battery information Shows the remaining battery and charging status. 9 Zoom status Shows the zoom status. 10 Remaining memory capacity Shows the remaining memory capacity 11 Memory status Shows whether memory is recognized. 3.2 Menu Operation Before you start: Wake up LCD. Step: Press the button to bring up main menu.
Body Camera User Manual 1) Enter Camera Settings interface. 2) Press the / button to position the cursor on Picture Quality. And click the button to enter Picture Quality menu. 3) Press the / button to select picture quality. And click the button to save the settings. 2. Enter live view mode, or you will fail to take pictures. 3. Press the The picture is saved in device memory in .jpg format and named by taking picture date and time.
Body Camera User Manual You can play back the audio in playback menu or download and save it in computer local path. For detailed steps of downloading audios, you can refer to 7.7 Assistant File Saving Path. 3.6 Playback Purpose: You can play back recorded videos, pictures, and audios. Steps: 1. Enter Playback interface. Main Menu > Playback 2. Enter device password to get permission. Figure 3. 3 Enter Password 3. Press the / button to select the playback file type as Video, Picture, or Audio.
Body Camera User Manual “Memory is full.” will pop up in LCD. To save new files, including videos, pictures, and audios, you need to backup device first and clear memory. Memory full alarm is on by default and cannot be turned off. Figure 3.
Body Camera User Manual Chapter 4 Network Settings 4.1 Dialing Purpose: For DS-MH2111/32G/GLF series body camera, you can access internet by dialing via 3G/4G SIM card. Before you start: Install SIM card first. For details, refer to 1.3 SIM Card Installation. Steps: 1. Enter Network Settings interface. Main Menu > Network Settings 2. Press the / button to position the cursor on Dial item. And press the button to enter the menu. Figure 4. 1 Dial 3. Press the / button to select Dial as On. 4.
Body Camera User Manual 4.2 Wi-Fi Purpose: You can access internet by connecting to a Wi-Fi. Before you start: Configure Wi-Fi parameters, including SSID and key, in body camera assistant. For detailed steps, refer to 7.5.4 Wi-Fi Parameters. Steps: To turn on Wi-Fi on LCD menu, do following steps: 1. Enter Network Settings interface. Main Menu > Network Settings 2. Press the / button to position the cursor on Wi-Fi item. And press the button to enter Wi-Fi menu. Figure 4. 3 Wi-Fi Settings 3.
Body Camera User Manual 4.3 Network Transmission Parameters Purpose: By setting network transmission parameters, you can determine the resolution, frame rate, and bitrate used by iVMS platform when it views body camera’s image. Steps: 1. Enter Network Settings interface. Main Menu > Network Settings Figure 4. 5 Wi-Fi Settings 2. Press the / button to position the cursor on Net Transmission Resolution, Net Transmission Bitrate, or Net Transmission Frame Rate. And press the 3. Press the 4.
Body Camera User Manual Chapter 5 Camera Settings Purpose: You can set the parameters for video, including resolution, frame rate, bitrate, and so on. Steps: To configure camera parameters on LCD menu, do following steps: 1. Enter Camera Settings interface. Main Menu > Camera Settings Figure 5. 1 Camera Settings 2. Press the / button to position the cursor on Video Resolution, Bitrate, Frame Rate, Pre-Record, Post-Record, or other items. And press the button to enter corresponding menu.
Body Camera User Manual Chapter 6 System Settings To enter System Settings menu, do following step: Press the / button to position the cursor on System Settings menu. And press the button to enter System Settings menu. 6.1 System Sound Purpose: You can turn on and turn off system sound if necessary. If you turn on it, when you press each buttons or alarm occurs, there will be a system sound. By default it is on. Steps: 1. Enter System Settings menu. 2.
Body Camera User Manual Figure 6. 2 LED Menu 6.3 Language Settings Purpose: Two languages are provided: Chinese and English. Steps: 1. Enter System Settings menu. 2. Press the / button to position the cursor on Language. And press the button to enter Language settings menu. 3. Press the / button to select LED as Chinese or English. And press button to save the settings. Figure 6. 3 Language 6.4 Turning on/off IR Lights Purpose: The body camera provides IR (Infrared Radiation) lights.
Body Camera User Manual Figure 6. 4 Infrared Menu 3. 4. Press the / button to position the cursor on OFF, ON, or AUTO. OFF: By default, IR light is off. The status adapts to daylight period. ON: In night period or dark environment, it is recommended to turn on IR light. AUTO: Body camera automatically turns on/off IR light according to environment. Press the button to save the settings. 6.5 Positioning Settings Purpose: Body camera has a built-in positioning module.
Body Camera User Manual Steps: 1. Enter System Settings interface. 2. Press the / button to position the cursor on System Information item. And press the button to enter System Information menu. Figure 6. 6 System Information 6.7 Battery Information Purpose: Battery information menu shows the remaining battery, time to fully charged, and charging status. Steps: 1. Enter System Settings interface. 2. Press the / button to position the cursor on System Information item.
Body Camera User Manual Chapter 7 Body Camera Assistant Purpose: Log into body camera via the Body Camera Assistant to view device’s logs, videos, audios, and pictures, and configure parameters remotely. Assistant mentioned below refers to the Body Camera Assistant. 7.1 Assistant Installation Purpose: The body camera assistant’s installation package is delivered with the CD. Installation package includes BodyCameraAssistant-win32.exe and BodyCameraAssistant-win64.exe.
Body Camera User Manual Figure 7. 2 Destination Location 3. Click Next to enter Select Start Menu Folder window. Optionally, you can edit the shortcut name and click Browser to select the folder where to create shortcut. Figure 7. 3 Start Menu Folder 4. Click Next to enter Select Additional Tasks window. Optionally, you can create a desktop icon by checking the checkbox of Create a desktop icon. Figure 7. 4 Additional Tasks 5. Click Next to enter Ready to Install window.
Body Camera User Manual Figure 7. 5 Ready to Install 6. During the installation process, the following window will pop up. Figure 7. 6 Device Driver Installation Wizard 7. Click Next to start installing device driver. Figure 7. 7 Device Driver Installation Wizard 8. Click Finish in Device Driver Installation Wizard and click Finish in Body Camera Assistant Wizard to finish the installation.
Body Camera User Manual Figure 7. 8 Finish 9. Then the body camera assistant window appears. Figure 7. 9 Body Camera Assistant 7.2 Device Login Purpose: You need to connect the assistant with body camera. Before you start: Connect the body camera to your computer with the USB data cable. Steps: 1. Run the assistant. 2. Click Recognize device button to start recognizing. Then the recognized device will be listed. Figure 7. 10 Recognized Device 3.
Body Camera User Manual window shows. If you forget the password, refer to 7.3 Password Recovery to recover password. CHANGE THE DEFAULT PASSWORD The default password (123456) for the Admin account is for first-time log-in purposes only. You must change this default password to better protect against security risks, such as the unauthorized access by others to the product that may prevent the product from functioning properly and/or lead to other undesirable consequences.
Body Camera User Manual Figure 7. 12 Login Window. 2. Click the Forget Password button. 3. Click the File Export button to export file DeviceKey.xml. 4. Send the file to your manufacturer. They will send you an encryption file. 5. Click the 6. Click Verifying Encryption to start verifying. If verifying succeeded, device password will be recovered to button to import the encryption file received in step 4. default. Figure 7. 13 Password Recovery 7.
Body Camera User Manual and switching device into USB mode. 7.4.1 File Operation via Assistant Purpose: You can download or clear files here. Steps: 1. Log in device via assistant. 2. Click the Media Information tab. Figure 7. 14 Media Information 3. Click All, Video, Audio, or Picture tab to select which file type you want to view. 4. Check the checkboxes of files you want to download. 5. Click the button to enter File Download window.
Body Camera User Manual Figure 7. 15 File Download 6. Click the icon to select Local File Saving Path. 7. Click OK to start downloading. 8. Optionally, you can click the button in top right corner to view downloading status. Figure 7. 16 Downloading Status 7.4.2 File Operation in USB Mode Steps: 1. Log in device via assistant. 2. Click the 3. Click OK to confirm in the pop up dialog box. Then the assistant will exit. icon in top right corner of assistant window.
Body Camera User Manual Figure 7. 17 Dialog Box 4. Enter Computer window to view the body camera. It will be recognized like an USB flash disk. Figure 7. 18 Devices with Removable Storage 5. Double-click the disk to enter it and operate files. 7.5 Device Configuration 7.5.1 User Information Settings Purpose: You can customize the police ID and device ID. Steps: 1. Click the Device Configuration tab, and click Device Information item in the left menu list. Figure 7. 19 User Information 2.
Body Camera User Manual 7.5.2 Encoding Parameters Purpose: You can set the parameters for video, including resolution, frame rate, bitrate, and so on. Steps: 1. Click the Device Configuration tab, and click Device Information item in the left menu. 2. Select Video Res.@Frame Rate, Net Transfer Res.@Frame Rate, Bitrate, and Net Transfer Bitrate from respective drop-down list. 3. Click Save to save the settings. Figure 7. 20 Encoding Parameters 7.5.
Body Camera User Manual 7.5.4 Wi-Fi Parameters Purpose: You can access internet by connecting to a Wi-Fi. Wi-Fi parameters can only be configured in assistant. Steps: 1. Click the Device Configuration tab, and click Network Settings item in the left menu list. 2. Check the checkbox of Enable. 3. Input SSID and Key of Wi-Fi signal you want to connect in text fields. 4. Click Save to save the settings. Figure 7. 22 Wi-Fi Parameters 7.5.
Body Camera User Manual In the situation of both dialing and Wi-Fi are connected, device prioritise access to internet through Wi-Fi. 7.5.6 Security Settings CHANGE THE DEFAULT PASSWORD The default password (123456) for the Admin account is for first-time log-in purposes only.
Body Camera User Manual Figure 7. 25 Platform Settings 2. Check the checkbox of Enable to enable platform connection. 3. Edit IP, Port, and Device ID. IP: The IP address of platform server you want to connect. Port: The port of platform. The default port of iVMS is 7660. Device ID: When adding device via platform, the ID is needed. It is device’s unique identification. 7.5.8 Formatting Purpose: Format helps you to clear all data saved in device.
Body Camera User Manual 7.5.9 System Resetting Purpose: You can reset all parameters to default settings by resetting system. Steps: 1. Click the Device Configuration tab, and click System Settings item in the left menu. 2. Click the Factory Defaults button. Figure 7. 28 System Reset 3. Input device password in the text field and click OK to start resetting. Figure 7. 29 Factory Defaults 7.
Body Camera User Manual Figure 7. 30 Log Information 2. To search logs in a specified duration, do following steps: 1) Edit the log’s start time and end time. Figure 7. 31 Search Condition 2) 3. Click the Search button to start search. The matched logs will be listed. To export searched logs, do following steps: 1) Search the logs you want to export. 2) Click the Export button to export them. The exported logs are saved in the set assistant’s log saving path and are saved in .txt format. 4.
Body Camera User Manual Figure 7. 32 Local Configuration 7.8 Upgrading Device Purpose: It is recommended to upgrade device with the help of professional technical support. Steps: 1. Switch to USB mode. For detailed steps, refer to 7.4.2 File Operation in USB Mode. 2. Enter the Removable Disk of body camera through Computer. 3. Copy the upgrade file into the removable disk. 4. Reboot the body camera. 5. Enter the System Setting in LED menu. 6.
Body Camera User Manual Figure 7.
Body Camera User Manual Chapter 8 Troubleshooting Unable to start up. a) Possible Reason: Device runs out of power. Solution: Get device be charged. b) Possible Reason: Device is abnormal. Solution: Hold down the Sleep/Down button for 15 seconds to reset device. Unable to start recording. a) Possible Reason: Memory is full. Solution: Back up device and clear the memory. b) Possible Reason: Formatting memory error. Solution: Format the memory via assistant.
Body Camera User Manual Specifications Model DS-MH2111/32G DS-MH2111/32G/GLF Type CMOS, 16MP Lens Angel Horizontal FOV: 127° Displayer 2.0″ TFT LCD Video Input 1080p Recording 1080p/60fps, 720p/120fps, 704*480 Dual-Stream Main stream: 1080p/60fps; Sub-stream:720p/30fps Video Format .mp4 Picture Resolution Up to 16MP Picture Format .jpg Shutter Digital shutter IR Light Automatically turn on/off IR light.
Body Camera User Manual 46
