Doorbell Chime Quick Start Guide www.imoulife.com T2.00250635 V1.0.
Welcome Thank you for choosing IMOU. We are devoted to providing you easy smart home products. If you have problems using the product, please contact our service team at service.global@imoulife.com before returning your product.
Package Contents Doorbell Chime ×1 Power Pin ×1 Quick Start Guide ×1 LED Status Overview Solid green Flashing green Front View Solid red Speaker Flashing red LED Indicator Flashing green and red Off 1 Device Status Operating correctly Setup successful Ready to set up the device Booting/Restarting Resetting to factory default Network disconnected Updating firmware Power disconnected
Back View Side View Antenna Power Pin Release Buckle Reset Button i How to reset the camera Press and hold the reset button for 10 s until the LED turns solid red. Set Up the Device Scan the QR code below, search for "Imou Life" in the app store, or navigate to Support > Download Center in our official website to download and install the app. 1 Imou Life i If you already use the app, make sure that you are using the latest version.
To ensure the best possible wireless performance, please make sure there are no obstacles and electromagnetic interference between the device and the router. The app will guide you through the setup process.
Install the Chime The chime needs high voltage power supplies that might cause injury or damage. Before getting started, turn off the power at the breaker, and make sure that no power is going to your doorbell system. Step 1 Place the power pin onto the rear side of the chime, and then press it down to fit the two parts together. Step 2 Slide the power pin upwards to secure it. A click sound will indicate that it is locked in.
Step 3 Plug your chime into the power outlet where you can hear the ringtone easily. It is recommended that the chime is located between the Wi-Fi router and the doorbell. Place them as close to each other as possible for optimal performance. Step 4 (optional) Install the video doorbell. For details, please refer to the doorbell guide. i Please link the chime to your doorbell on the device setting page of the doorbell; otherwise, your chime cannot work.
Troubleshooting Q: Failed to set up the device? Ensure your smart phone and the device are within range of your Wi-Fi router (recommended to be no more than 5 m (16 ft). If the location where the chime is installed has a weak signal, consider adding a Wi-Fi extender between your router and the doorbell. Ensure the LED on the device is flashing green before setup. Reset the device, and then set it up again.
Q: How to pair the doorbell to the chime? After setting up the chime, on its setting page, tap Quick Setup, and then follow on-screen instructions. Switch the WLAN of the doorbell to the one from the chime. Q: My chime has been linked to the doorbell, but live streaming of the doorbell is poor? Install the chime between the doorbell and the router, such as the hallway. Check if your network is stable and at least 2 Mbps of the bandwidth is required.
Legal and Regulatory I nformation 1 .2.51 .32. 1 52 1 0-001 V2.0.0 Legal Considerations Video s u rve, l lance can be repulated by l aws that vary from cou ntry to ccuntry Check the l aws ,n you r loca region before us,ng th,s prod u ct for s u rve, l lance p u rposes Disclaimer , Restrictions of Haza rdous Substances (Ro HS) Directi ve 2011 /65/EU and its amending Directive (EU) 201 5/863 A copy of the original declaration of oonfonnity may be obtained from Dah u a Technology.
