Quick Start Guide

Install the Chime
The chime needs high voltage power supplies that might cause injury or damage. Before getting started,
turn o the power at the breaker, and make sure that no power is going to your doorbell system.
Step 1 Place the power pin onto the rear side of the chime, and then press it
down to t the two parts together.
Step 2 Slide the power pin upwards to secure it. A click sound will indicate that it
is locked in.
How to detach the power pin from the chime
Press the release button and meanwhile slide sown the power pin to remove it.
i
4
+50 °C/122 °F
-10 °C/14 °F
90 V-250 V
50/60 Hz
AC