User's Manual

三、功能说明 四、操作说明
1、功能显示（正面）：
一、装箱清单
2、接口说明（背面）：
主机 X1
二、产品主要参数
型号
蓝牙版本
频率响应
信噪比
全频喇叭
低频辐射
功率
输入方式
输出方式
产品尺寸
Play1D
V5.0
100Hz-20KHz
＞70dB
2 英寸 *2
跑道型辐射器 *2
6W
蓝牙、3.5mmAUX 有线、3.5mm MIC 麦克风
3.5mm 耳机
L420*W61*H64.5mm
耳机输出
麦克风输入
电源输入
备用按键 (PAIR)：
短按一次关闭 / 打开旋钮灯光
长按≥3 秒重置蓝牙配对。
AUX IN 输入
1、短按一次背面接口PAIR键，可关闭/打开旋钮灯光；
2、充电时请注意充电器是否选择5V2A，或电流是否大于1A，以免供电不足，出现破音，
或其它杂音；
3、强烈建议选择高品质的3.5mm接头MIC麦克风，以免出现语音时啸叫；
4、使用电脑USB端口进行供电时，因部分USB端口供电不足，在最大音量播放时可能导
致轻微失真或断音现象，此时请调整音量或更换供电方式；
5、产品支持Win7及Win7以上系统，Mac系统
音箱使用说明书
：表示该有害物质在部件所有均质材料中的含量均在GB/T 26572规定限量要求以下。
X ：表示该有害物质至少在部件的某一均质材料中的含量超出GB/T 26572规定的限量
要求，目前业界没有成熟替代方案，符合欧盟RoHS指令环保要求。
本表格依据SJ/T 11364的规定编制。
六、产品有害物质的名称及含量
新音响，煲机后效果更佳；好音响更是如此
2/3音量， 正常使用7天左右，可达到基本的煲机效果
适用于Play1D系列
五、保修条例
1、本产品执行国家规定的三包政策：
（1）、自购买之日起享受一年的免费保修服务；
（2）、在三包有效期内，您可以依照规定享受修理、换货、退货的权利。
2、发生下列情形者，本公司将无法为您提供免费服务，需酌情收取材料费和服务费：
（1）、超过保修期限；
（2）、一切人为因素损坏，包括由于使用或保管不当造成的损坏，如液体进入、外力挤压，坠落
受损等；
（3）、未经授权，擅自拆卸或维修造成的损坏；
（4）、其他不可抗力因素（如水灾、火灾等）所造成的损坏。
3、需要送修时，请和售后人员联系，按要求将产品邮寄到指定地点；
4、送修产品请妥善包装运输，运输过程中如有损毁或遗失，本公司恕不负责；
5、本保修条例仅限于中国大陆地区。
保修卡
用户姓名
地址
购买时间
故障描述
电话
购买店铺
Name
Address
Date of Purchase
Fault
description
音量旋钮
1、开机
从包装配件中取出 USB 电源线，一端插入音箱背面 DC 5V 插孔中，再将 USB 接口端
插入 5V 的 USB 充电器（充电器可与手机充电器等通用），或电脑的 USB 端口，音箱
即自动开机。
2、有线/无线模式切换：
（1）开机默认蓝牙模式（语音提示：蓝牙模式）；
（2）插入AUX音频线时，自动切换至AUX有线模式（语音提示：AUX模式）；拔掉AUX音频
线，自动切换至蓝牙模式。
3、蓝牙无线播放操作：
（1）开机后，或在确保AUX音频线没插入情况下，打开手机搜索设备BINNIFA Play1D,选
择并连接，连接成功后播放；
（2）蓝牙模式时，想切换手机连接，需断开之前已连接的手机，再用另一部手机搜索连接
播放。
4、AUX in有线播放操作:
（1）取出配送的3.5mmAUX一对一音频线，一端插入音箱背面的AUX接口内（语音提示：
AUX模式），另一端连接上音源设备即可播放音乐；
（2）需从AUX有线切换至蓝牙无线播放时，请拔出AUX有线，产品自动切换至蓝牙无线模
式。
5、3.5mm接口MIC麦克风功能操作：
在蓝牙模式下，将3.5mm接头MIC麦克风插入背面MIC输入口中，即可进入麦克风通话。
6、外放耳机播放操作：
在任意模式下，将耳机插进背面耳机输出口中，即可通过音箱进入耳机听音乐。
AUX 一对一音频线 X1
说明书 X1USB 电源线 X1
灯光提示：
1、开机：蓝色；
2、未连接音源：蓝色呼吸灯快闪；
3、已连接无播放：蓝色呼吸灯慢闪；
4、播放：彩色律动。
重要提示
尺寸 120x90cm 颜色 单色
a.Function display (front)
b.Interface (back)
1.Packing List 3.Function Description 4.Operating Instructions
2.Specification
Speaker
Model
Bluetooth
Frequency
S/N Ratio
Speakers
Low Frequency Radiation
Power
Interface
Output
Dimension
Play1D
V5.0
100Hz-20KHz
＞70dB
Full-Range Driver: 2-inch*2
Runway Radiator
6W
Bluetooth, 3.5mm AUX cable, 3.5mm MIC
3.5mm earphone
L420*W61*H64.5mm
Headphone output
Microphone input
Power input
Alternate Button (PAIR):
Short press once to turn off/on the knob light;
Long press ≥3 seconds, Reset Bluetooth pairing.
AUX in input
5.After-sales Services and Warranty
1.Short press the “PAIR” button on the back interface once to turn off/on the knob light;
2.Please charge the speaker with a 5V 2A charger, so as to avoid insufficient power supply,
broken sound, or other noise;
3. It is strongly recommended to choose a high-quality 3.5mm connector microphone to
avoid howling during using MIC interface;
4. When using a computer USB port for power supply, due to insufficient power supply for
some computer USB ports, slight distortion or sound interruption may occur during playback
at maximum volume. At this time, please adjust the volume or change the power supply
method;
5. The speaker supports Win7 and above systems, Mac systems.
1. 30-Day Return of Any Reason. You may return your undamaged product and
packaging within 30 days, please return the unit in its original carton.
2. 12-Month Warranty for Quality-Related Issues. If it is not quality related, the customer
must pay the return shipping costs and repair costs.
3. In the following circumstances, we will not be able to provide you with free services:
(1) Exceeding the warranty period;
(2) All damage caused by human factors, including damage caused by improper use or
storage, such as liquid entry, external force squeezing, and falling damage etc.;
(3) Damage caused by unauthorized disassembly or repair;
(4) Damage caused by other force majeure factors. (such as floods, fires, etc.)
Volume knob
a. Turn on
Take out the USB power cord from the package accessories, plug it into the DC 5V jack on the
back of the speaker, and then plug the USB interface end in a 5V USB charger (the charger can
be used with mobile phone chargers, etc.), or a computer’s USB port, speakers will starts
automatically.
b. Wired/wireless mode switching:
(1) It default Bluetooth mode when starting up (voice prompt: Bluetooth mode);
(2) When the AUX audio cable is inserted, it will automatically switch to AUX mode (voice
prompt: AUX mode); unplug the AUX audio cable, automatically switch to Bluetooth mode.
c. Bluetooth wireless connection:
(1) After turning on the speaker, making sure that the AUX audio cable is not plugged in, and
search for “BINNIFA Play1D” on your Bluetooth device, then pair to the speaker. You can use
Bluetooth to play music when successfully connected;
(2) In the Bluetooth mode, If you want to connect to another device, you need to disconnect the
previously connected one, and then use another device to repeat the previous Bluetooth
connection steps.
d. AUX in wired connection:
(1) Take out the 3.5mm AUX audio cable, plug one end into the AUX interface on the back of
the speaker (voice prompt: AUX mode), and connect the other end to the audio source device
to play music;
(2) When you need to switch from AUX wired to Bluetooth wireless mode, please unplug AUX
wired and the product will automatically switch to Bluetooth wireless mode.
e. 3.5mm MIC interface:
In BT mode, insert the 3.5mm connector microphone into the MIC input port on the back to
enter the microphone call.
f. Play operation of external earphone:
In any mode, plug the earphone into the earphone output port on the back, you can enter the
earphone to listen to music through the speaker.
AUX in audio cable
User manual
USB power cord
Light display:
Note:
1. Power on: Blue;
2. No audio source connected: Blue light
flashes quickly;
3. Connected but no music played: Blue
light flashes slowly;
4. Play music: Colorful rhythm.
:Indicates that the content of the hazardous substance in all homogeneous materials of the part is
below the limit requirement specified in accordance with the GB/T 26572.
X:Indicates that the content of the hazardous substance in all homogeneous materials of the part is
exceeding the limit requirement specified in accordance with the GB/I 26572. There is no mature
alternative solution that meets the requirements of RoHS.
The numbers in this mark indicate that the environmental protection use period of the product
under normal use is 10 years. Some components may also have an environmental protection
use period indication, and the environmental protection use period is subject to the figures in
the indication. Due to different product models, the product may not include all the above parts
except the host, please refer to the product packaging.
This form was prepared in accordance with the provisions of SJ/T 11364.
6.The Toxic and Hazardous Substances or Elements
Toxic or harmful substances or elements
Part Name
Lead Mercury Cadmium
Hexavalent
Chromium
Polybrominated
biphenyls
Polybrominated
Diphenyl Ether
PCB part
Plastic part
Metal part
Speaker
Power adapter
Only for use in non-tropical climates.
Only suitable for areas below altitude of 2 000 m.
Order ID
Email
User Manual
BINNIFA Play1D speaker
The speaker reaches full acoustic performance after it has
played music for about 7 days at 2/3 volume
400-088-9508
物料编号：YC000748