Use Instructions

GameShell Instructions for use

Overview

GameShell is a game console needs to be assembled by the user and based on the microprocessor

development board with Linux system & opensource software. It has onboard WIFI and Bluetooth chips.

1. Turn on the power

Tap the power key (see blue circle above) for 1 second, the system will start up.

2. Turn off the power

Tap the power key for 1 second, the system will shutdown.

Tap the power key for 3 seconds, the system will be doing hardware shutdown.

PAGE 1
GameShell Instructions for use Overview GameShell is a game console needs to be assembled by the user and based on the microprocessor development board with Linux system & opensource software. It has onboard WIFI and Bluetooth chips. 1. Turn on the power Tap the power key (see blue circle above) for 1 second, the system will start up. 2. Turn off the power Tap the power key for 1 second, the system will shutdown. Tap the power key for 3 seconds, the system will be doing hardware shutdown.
PAGE 2
3. Connect WIFI hotspot After booting, select the “settings” icon with D-pad and push button “B”, enter to the “settings list” then select “Wi-Fi” Manu and push button “B”, the system will start scanning WIFI hotspots. Select the correct SSID and push button “B” to setup up wifi password with a virtual keyboard. Use d-pad and button “B” to input Wi-Fi password characters. After entering the password, push button “Y” to create the connection. Press the “Menu” button to return to the previous level. 4.
PAGE 3
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.