3S ORIGINALITY DESIGN SMART AND BEAUTIFUL QUICK GUIDE
What's in the box Consult the checklist below for all components.
Status light Speaker Microphone Reset1 SD card slot Power Reset2 Description Power DC12V±10% Status light Red light solids on: the camera network is abnormal Blinking red light: awaiting WiFi connection (faster blinking) Blue light solids on: camera running correctly Blinking blue light: currently connecting (faster blinking) Microphone Captures sound for your video SD card Supports local SD Card storage (Max.
Install 1 Fix the Camera to the wall with screws 2 Ajust camera angle to a correct view（as shown in the picture） 3
Connect Download Smart Life is available for both iOS and Android OS. Rearch the name 'Smart Life' in App Store or Android Market, or scan the QR-Code to download the App. ·Support IOS Android Download App(IOS&android) Set up router This camera only supports 2.4GHz WiFi networks.Check that your WiFi router is switched on.For a faster installation,place the camera and your smartphone near the WiFi router(Internet box) in order to benefit from a better connection.
Registration process Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy" and click "Agree" . Step 2 input a legal and valid Mobile number or Email address and click "Continue". Input Verification Code, then log in the app.
QR Code Configuration 1 Open the Smart Life App, click "Create family", and you can customize the Family name and related settings . 2 Continue to click "Security & Sensor" >> "Smart Camera",and then choose "Add Device" or "+",ready to add camera.
3 In "Add Device" this interface,continue to click "next step",and then you should input your WiFi's passwords. Note: 1) Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits.
4 In this interface,you should scan the QR code in your phone with the camera.When the doorbell comes out with a "dong dong dong" sound you can complete the configuration in about 30 seconds.
5 When connecting,you should make sure your router,mobile,and camera are as close as possible.When camera added successffully,click " " you could also DIY the camera's name.
Settings In "Smart Camera" interface,click " ",you can set the camera common functions.
FAQ Q: In the network process, the process bar is always not 100%, add failure? A: This smart doorbell only supports 2.4GHz WiFi router, please make sure you are using a 2.4GHz WiFi router.And confirm the WiFi password again. Q: Repeated additions are failures? A: After adding a failure, it is recommended to restart the device or power off, and then try to add again.
Functions 功能介绍 Video flip Flip your video stream up or down for maximum flexibility. Motion detection Built-in motion sensors detect movement, and the camera will send you push notifications and app alerts. Record Support 24H continuous recording with high capacity SD Storage or Cloud Storage. Daytime & Night Never miss a moment, even in complete darkness, with powerful night-vision technology.
FCC Statement： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
