Bullet 6S ORIGINALITY DESIGN SMART AND BEAUTIFUL QUICK GUIDE
What's in the box Consult the checklist below for all components.
Description Microphone SD card slot Reset Status light Speaker Power DC12V±10% Status light Solid red light on: the camera is turning on or malfunctional Blinking red light: awaiting WiFi connection Solid blue light on: the camera runs correctly Blinking blue light: currently connecting Microphone Capture sound for your video SD card slot Support local SD Card storage (Max.
Install After ajusting your camera angle, please lock this screw 1 Fix the Camera to the wall with screws 2 Adjust camera angle to a correct view（as shown in the picture） 3
Connect Download SmartLife is available for both iOS and Android OS. Search the name 'Smart Life', in App Store or Google Play, or scan the QR-Code to download the App. ·Support ipad IOS Android Download App(IOS&android) Set up router The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi. Please keep network available 2.
Connect Registration process Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy" and click "Agree" . Step 2 Input a legal and valid Mobile number or Email address and click "Continue". Input Verification Code, then log in the app.
QR Code Configuration 1 Open the Smart Life App, click "Create family", and you can customize the Family name and related settings . 2 Continue to click "Security & Sensor" >> "Smart Camera",and then choose"Add Device" or "+",ready to add camera.
QR Code Configuration 3 In "Add Device" this interface,continue to click "next step",and then you should input your WiFi's passwords. Note: 1) Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits.
QR Code Configuration 4 In this interface,you should scan the QR code in your phone with the camera,when the camera comes out "dong dong dong". And you can complete the configuration about 30s.
QR Code Configuration 5 When connecting,you should make sure your router,mobile,and camera are as close as possible.When camera added successffully,click " " you could also DIY the camera's name.
Settings In "Smart Camera" interface,click " ",you can set the camera common functions.
FAQ Q: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. Q: Why is it still in the list of devices after reseting? A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Functions Video flip Flip your video stream up or down for maximum flexibility. Motion detection Built-in motion sensors detect movement, and the camera will send you push notifications and app alerts. Record Support 24H continuous recording with high capacity SD storage. Daytime & Night Never miss a moment, even in complete darkness, with powerful night-vision technology.
,)) 9ZGZKSKTZ͵ Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
