Bullet 8S ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
What's in the box Consult the checklist below for all components.
Description Speaker Microphone Reset SD card slot Status light Power DC12±10% Status light Blinking red light: wait for network connection Solid blue light on: camera is working correctly Solid red light on: camera is malfunctional Microphone Capture sound for your video SD card slot Support local SD Card storage (Max.
Installation Bracket Installation 2 1 0°~360° 0°~150° Recommend 15°~20° 3 1. Push the bracket in the direction shown to take apart. 2. Install the bracket to the wall with screws. Put the UP logo up. 3. Insert the bracket upward and then push the bracket in the opposite direction of step 1, to lock the bracket with the camera. (Optional) You can adjust the camera horizontally or vertically by manual.
Connection Download SmartLife or Tuya Smart is available for both iOS and Android OS. Search the name 'SmartLife','Tuya Smart' in App Store or Google Play, or scan the QRCode to download the App. You can select the App according to needs. ·Support iPad iOS Android Download App(iOS&Android) Set up router The router supports the 2.4GHz Wi-Fi (doesn't support the 5GHz), and is connected to the Wi-Fi network.
Connection Registration process Step 1 Open the Smart Life App, click "Sign Up", read the "User Agreement Privacy Policy" and click "Agree" . Step 2 Input a legal and valid Mobile number or Email address and click "Get Verification Code". Input the verification code to log in.
QR Code Configuration 1 Open the Smart Life App, click "My" >> "Home Management" >> "Create a home", and you can customize the home name and related settings. 2 Click "Add Device" or "+", and then select "Security & Sensor" >> "Smart Camera" to add camera.
QR Code Configuration 3 Power on and reset camera until the status indicator is flashing quickly or a prompt tone is heard, and then click "Next". Then input your Wi-Fi's passwords and click "Next". Click " " to change network. Note: 1) Camera only supports 2.4GHz Wi-Fi network. 2) The number of bits in the SSID and passwords of the router should not exceed 24 digits.
QR Code Configuration 4 In this interface, you should scan the QR code in your phone with the camera,when the camera comes out "dong dong dong". And you can complete the configuration about 30s.
QR Code Configuration 5 When connecting, you should make sure your router,mobile,and camera are as close as possible. When camera added successfully,click " " you could also DIY the camera's name.
Settings In "Smart Camera" interface,click " ",you can set the camera common functions.
FAQ Q: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. Q: Why is it still in the list of devices after reseting? A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Functions Video flip Flip your video stream up or down for maximum flexibility. Motion detection Support smart motion detection. The camera will detect movements, and then send you push notifications and app alerts. Record Support 24H continuous recording with high capacity SD storage or Cloud storage. Day & Night Never miss a moment, even in complete darkness, with powerful night-vision technology.
Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
