Bullet 8SE ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
What's in the box Consult the checklist below for all components.
Description Speaker Microphone Reset SD card slot Status light RJ45 Power Power 12V/1A Status light Blinking red light: wait for network connection Solid blue light on: camera is working correctly Solid red light on: camera is malfunctional Microphone Capture sound for your video SD card slot Support local SD Card storage (Max.128G) Reset Press and hold for 5 seconds to reset the camera (if you have modified settings, they will return to factory defaults) RJ45 Interface for wired network.
Waterproof Terminal Connection 3
Installation Bracket Installation 1 2 0°~360° 0°~150° Recommend 15°~20° 3 1. Push the bracket in the direction shown to take apart. 2. Install the bracket to the wall with screws. Put the UP logo up. 3. Insert the bracket upward and then push the bracket in the opposite direction of step 1, to lock the bracket with the camera. (Optional) You can adjust the camera horizontally or vertically by manual.
Connection Download SmartLife or Tuya Smart is available for both iOS and Android operation system. Search the name "SmartLife" or "Tuya Smart" in App Store or Google Play, or scan the QR-code to download the App. You can select the App according to needs. ·Support iPad iOS Android Download App(iOS&Android) Set up router The camera only supports wired connection of network cable. Please prepare the network cable in advance. Make sure that there is a steady and fluent network.
Registration Registration process Step 1 Open the App, click "Sign Up" to register. If you already have an account, click “Log In” to log in. Step 2 Input a legal Email address and check the privacy aggreement. Then enter the verification code finish registration.
Cable Configuration 1 1) Set up the parameters of router firstly and then record the SSID and password of your Wi-Fi. Make sure the Wi-Fi is stable and fluent. 2) Connect your smartphone to the Wi-Fi. Note: • Please consider the installation position of camera before selecting a router which also provides Wi-Fi for your smartphone, because the camera have to be connected to the router by network cable. • Camera only supports 2.4GHz Wi-Fi network.
Cable Configuration 4 Click "Add Device" and then select the corresponding device icon to add. 5 Click " " to change network, and then select “Cable” as connection method. Power on and reset camera until the status indicator is flashing quickly or a prompt tone is heard, and then click "Next". It will search for devices connected to the router automatically.
Cable Configuration 6 In the device adding list, select the device you need and then tap “+”. 7 When connecting, you should make sure your router,mobile,and camera are as close as possible. When camera added successfully,click " " you could also DIY the camera's name.
FAQ Q: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. Q: Why is it still in the list of devices after reseting? A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Functions Video flip Flip your video stream up or down for maximum flexibility. Motion detection Support smart motion detection. The camera will detect movements, and then send you push notifications and app alerts. Record Support 24H continuous recording with high capacity SD storage or Cloud storage. Full color vision With white light, the captured pictures and videos of motion detection are colorful which can provide you a better vision.
Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
