Quick Guide

Installation
4
Bracket Installation
1. Push the bracket in the direction shown to take apart.
2. Install the bracket to the wall with screws. Put the UP logo up.
3. Insert the bracket upward and then push the bracket in the
opposite direction of step 1, to lock the bracket with the camera.
(Optional) You can adjust the camera horizontally or vertically by
manual. It is recommended to adjust camera horizontally between
0 to 150 degrees, and vertically between 15 to 20 degrees. You
can also rotate the bracket from 0 to 360 degrees.
1
2
3
0°~360°
0°~150°
Recommend
15°~20°