8S ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
What's in the box Please consult this checklist for all parts.
Power Microphone USB SD card slot Status light Reset Speaker Description Power DC5V±10% Status light Red light solid on: the camera network is abnormal Blinking red light: awaiting WiFi connecting, or currently connecting (faster blinking) Blue light solid on: camera running correctly Blinking blue light: awaiting manual WiFi configuration, or currently connecting (faster blinking) Microphone Captures sounds for your video SD card slot Supports local SD Card storage (Max.
Install 1 Stick the adhesive tape in the middle of camera bottom 2 Put the camera on the clean plane 3
Connect Download CloudEdge is available for both iOS and Android OS. Search the name 'CloudEdge'in App Store or Android Market, or scan upper QR-Code to download the App. ·Support ipad IOS Android Dowoload App(IOS&android) Set up router This product only supports 2.4GHz frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before WiFi configuration, WiFi passwords do not include special characters such as .
Registration process Step 1 Open the CloudEdge App, click 'SIGN UP', input a valid email address and select 'registration means agreement with user agreement privacy agreement' then click 'NEXT'. Step 2 Enter the email address and click 'OK', create a nickname and login password. Note: Make sure your router, device, and mobile phone are nearby.
QR Code Configuration Few notices before adding the device 1. This device only supports 2.4GHz WiFi router, please make sure you are using a 2.4GHz WiFi router. 2. Please follow the instructions and make sure the password is inputed correctly. 3. One device can only be added with one App account, if the device has been added with another account already, then it can’t be added to any another account again. Process Step 1 Open the CloudEdge App, click '+', and select the type of device to add.
Step 3 The device is scanning the QR code at a distance of 15~25cm (you can click the 'operation' to view the scanning mode). After the device scans successfully, click 'Hear tone'.
Step 4 The device is successfully connected to the network. After the configuration is completed, the App automatically adds the successfully scanned device, and return to the device list. The configuration is completed. Step 5 Click the play button to complete the preview.
Functions Video flip Flip your video stream vertically anytime for maximum flexibility. Motion detection Motion sensors will notify you when movement is detected. Record Record every moment using high capacity SD card storage. Day & Night Powerful night vision means no interruptions, even in complete darkness.
FAQ Q: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. Q: Why is it still in the list of devices after reseting? A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.