iis ee ee Please consult this checklist for all parts.
Power port Le ave ine Reset "Power button pis Charging indicator Micro USB SD card slot Status light Photosensitive Microphone Speaker PIR Power on/off Press power button for 3 seconds to turn on/off the camera Status int SD card slot Renal Charging indicator Battery capacity = Solid red lint on the camera Is turning on or ma functions ® Blinking red light awaiting Wiki connection (slowly blinking) connecting the Will Quickly bunking) ¢ Blinking blue lint currently connecting © Solid blue lat en: the camper
oe Mode Bracket installation 0~360° After fixing your camera, please lock this screw @ After adjusting your camera angle, please lock this screw @® 1.Fix the bracket on the wall 2.
Download Cloud Edge is available for both iOS and Android OS. Search the name ‘Cloudiness App Store or Google Play, or scan the QR-Code to download the App. Support @ a Add device Log in the Cloud Edge, select "Add Device”, and add the smart camera to the App according to the screen tips{Make the smart camera close to the router when configuring).
FAQ (: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. CO Why is it still in the list of devices after resting? A The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Functions Remote wake tn The camera will be in a sleep mode to save power; vou can have a preview in App. Duper audio You can see and hear the visor in your App from the camera. PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm When the battery power is lower than your set, the App will send a notification fo your mobile phone. Record Using SD card or opening the Cloud-Storage Service, to keep recording for Avery moment.
Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
