Speaker Lens Photosensitive | Status light PR | Reset || Micro USB Microphone Power button Charging indicator ) ‘ SD card slot Power port DE Sven Power on/off Press the button for 3 seconds to turn on/off the camera Status okt © Solid red Bonn on the camera (5 Hing on or ma functional ¢ Blinking red light awaiting Wii connection (slowly inkling connecting the Wik cloudy blinding » Blinking blue lah currently connecting © sonic blue Host on the camera runs correctly SD card slot Support local 8D card storage
Install Mode 1 Bracket (A) Installation — 1.Fix the bracket on the wall with screws 2.Bring the camera closer to the bracket Mode 2 Bracket (B) Installation 0~360° <= After adjusting your camera angle, please lock this screw 1.Fix the bracket on the wall 2.
GE. Download Smartness or Tia Smart is available for both iOS and Android OS. Search the name ‘Smartness, Tia Smart’ in App Store or Google Play, or scan the Qr Code to download the App. Support Setup outer The router supports the 2.4GHz WiFi (doesn't support the GHz, and is connected to the WiFi network Please set the parameters of the router before connecting the WiFi network, and record the SAID and password of your WiFi. Planes bong retentive bilabial 2.
Registration process Step 1 Open the Smart Life App, click "Sign Up", read the "User Agreement Privacy Policy” and click “Agree” . User Agreement and Privacy Policy. Disagree Step 2 Input a legal and valid Mobile number or Email address and click “Get Verification Code”. Input the verification code to log in. £ Register Enter Verification C...
QR Code Configuration 1 Open the Smart Life App, dick "My" >> "Home Management” >> "Create a home”, and you can customize the home name and related settings . 2 ve Can eel Create Home i Hoa Names A Coma Ligation Hangzhou Ck.
QR Code Configuration €} rower on and reset camera until the status indicator is flashing quickly or a prompt tone is heard, and then click "Next". Then input your WiFi's passwords and click "Next". Click "#7" to change network. Can eel CHU Camel Reset the device first. Select 2.4 GHz WI-Fi Fee ne device GEE Bike surging Network and enter inoffensive is: flushing guided or impromptu EE Crete SHEW Note: 1} Camera only supports 2.
QR Code Configuration 4] In this interface, you should scan the QR code in your phone with the camera, when the camera comes out "dong dong dong”. And vou can complete the configuration about 30s.
QR Code Configuration & wren connecting, you should make sure your router, mobile,and camera are as close as possible When camera added successfully, click "EI you could also DIY the camera's name. Lance Adding device... Ala, Ensure that the WI-Fi signals gac. Seat devise.
In "Smart Camera” interface, click "0", you can set the camera common functions.
eel k The device cannot be previewed properly? A: Check whether the network is normal, vou can place the camera close to the router, and if not, it is recommended fo reset the device and add it again. : Why is it still in the list of devices after resting? A: The reset device only resets the network configuration of the camera, buf cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Remote wake-up The camera will be in a sleep mode to save power; you can have a preview in App. Fulfilled aide You can see and hear the visor in your App from the camera. PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm When the battery power is lower than your set, the App will send a notification to your mobile phone. Record Using SD card or opening the Cloud-Storage Service, to keep recording for every moment.
Ellen FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
