Speaker PIR Sensor Lens Status light Reset Photosensitive Micro USB Charging indicator oS Microphone | SD card slot Power Bor DC sve on Power on/off Press the button for 3 seconds fo turn on/off the camera Status lol. Bed Hal solids on the cares spelunker Bs abnormal * Hed Loh Blinks awaiting WIE connection, of currently connecting taster binding) Blue light solids on camera tuning corer SD card slot Support local SD Card storage (Max.
io Moro | Bracket (A) Installation 1.Fix the bracket on the wall with screws 2.Bring the camera closer to the bracket Mode 2 Bracket (B) Installation After adjusting your camera angle, please lock this screw 1.Fix the bracket on the wall 2.
Download Smart Life is available for both 108 and Android OS. Search the name "Smart Life'in App Store or Android Market, or scan the QR-Code to download the App. Support O CEE rE Sel up tiler The router supports the 2.4GHz WiFi (doesn't support the connecting to the WiFi network please set the parameters of the router, and record the 5510 and password of your WiFi Platte keeps network stable 2.
Connect Registration process Step 1 Open the Smart Life App, click “Register”, read the "Privacy Policy” and click “Agree” . ie die 008 Crass msn WES Se SA AR FRR ERIE GOSH EO RA BA BBE a RS CG tin i de ge “persist iad sans Way Se ond AER dialing hil adaption bia Birdbath misinformation i contortion wed How: a wR BiH Step 2 Input a legal and valid Mobile number or Email address and click "Continue”. Input Verification Code, then log in the app.
QR Code Configuration @ Open the Smart Life App, slick "Create family”, and you can customize the Family name and related settings . Lanes Ail Fiat Bus Fay ae. YF ARS TOR, Re RNa DLT Li using & Turn on your smart life Ld & Divinity Bao. & Kali Continue to click "Security & Sensor” >> "Smart Camera” and then choose"Add Device” or ready to add camera.
QR Code Configuration & In "Add Device” this interface continue to click "next then you should input your WiFi's passwords. Add Device Enter WI-Fi Password Pa HE Alsatian Eh inanimate Bb Mote: 13 Camera only supports 2.4GHz WiFi network, 23 The number of bits in the said and passwords of the router should not exceed 24 digits.
QR Code Configuration € in this interface you should scan the OR code in your phone with the camera, when the camera comes out "dong dong dong”. And you can complete the configuration about 30s.
QR Code Configuration & when connecting, you should make sure your router, mobile,and camera are as close as possible When camera added successfully, click “EP you could also DIY the camera's name.
FAQ (: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. CO Why is it still in the list of devices after resting? A The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Functions Remote wake to The camera will be in a sleep mode to save power; vou can have a preview in App. Tuples audio You can see and hear the visor in your App from the camera. PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm When the battery power is lower than your set, the App will send a notification to your mobile phone. Record Using SD card or opening the Cloud-Storage Service, to keep recording for Avery moment.
Functions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
