S ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
What's in the box Consult the checklist below for all components.
Status light Microphone Speaker Reset Description Power DC12±10% Status light Red light solids on: the camera network is abnormal Blinking red light: awaiting WiFi connection (faster blinking) Blue light solids on: camera running correctly Blinking blue light: currently connecting (faster blinking) Microphone Captures sound for your video SD card slot Supports local SD Card storage (build-in SD Card) Reset Press and hold for 5 seconds with pin to reset the camera (if you have modified settings,
Install 1 Ceiling type 1) Take the metallic components apart from bracket. 2) Fix the bracket on the ceiling with screws 3) Rotate the camera to snap into bracket. Push the expansion screw into the wall. 2 Wall mounting type 1) Fix the bracket on the wall with screws shown as the picture. 2) Rotate the camera to snap into btacket.
Connect Download Smart Life is available for both iOS and Android OS. Rearch the name 'Smart Life'in App Store or Android Market, or scan the QR-Code to download the App. ·Support IOS Android Dowoload App(IOS&android) Set up router This device only supports 2.4GHz frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before WiFi configuration, WiFi passwords do not include special characters such as ~!@#$%^&*().
Registration process Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy" and click "Agree" . Step 2 input a legal and valid Mobile number or Email address and click "Continue". Input Verification Code, then log in the app.
QR Code Configuration Getting started 1. Please follow the instructions and make sure the passwords are inputed correctly. 2. One device can only be added with one App account, if the device has been added with another account already, then it can't be added to any another account again. 3.The device will be unbind from previous account after been deleted from App. Further ,the device will be resetted automattically once from blue light to red light.
Step 3 Input WiFi passwords and click "Confirm", scan the QR Code with a device.
Step 4 Click "I heard the beep" when the device comes out "dong dong dong". And you can complete the configuration about 30s. Step 5 The device is added, and the device nickname can also be changed in this interface.
FAQ Q: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. Q: Why is it still in the list of devices after reseting? A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Functions Pan/Tilt Rotate your camera by sliding on your smartphone, providing you with 360 degrees of vision. Video flip Flip your video stream up or down for maximum flexibility. Motion detection Built-in motion sensors detect movement, and the camera will send you push notifications and app alerts. Record Support 24H continuous recording with high capacity SD storage. Day & Night Never miss a moment, even in complete darkness, with powerful night-vision technology.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.