User's Manual

39
7.7Call settings
In start menu, press “settings”, then press to do call settings.
▲ Note: some functions depend on network suppliers. You can consult your operator for
detailed parameters.
 7.7.1Call:
Profile picture Project introduction
Call barring: prohibit incoming or outgoing call
selectively.
Call waiting: You can receive or dial another number
when you are on one call, also you can switch two calls
as you need.
Caller ID：Local ID display；
Cell Broadcast ： You can receive reports from
broadcasting band.
Fixed dialing: you can dial appointed numbers only.
 7.7.2Divert：
Call divert, date call divert, fax call divert, SMS call divert
option introduction
Check condition Check diverting condition
Divert always Divert any time.
Busy Divert when busy
No reply Divert when no reply
Unreachable Divert when it is unreachable
Cancel Exit call setting
 7.7.3network:
You must register in local wireless network in order to dial or send message.
▲Note: if you have 2 or 2 more network, you can choose”auto” or”manual” to select your
network.
7.8. Calibrate
In start menu，press “settings”, then press to calibrate.