User's Manual

8
2.4Internet connection
2.4.1 SIM card
▲ SIM card：Subscriber identity module, it is used to save user ID provided by operator and
other detailed information, also can save your contacts.
2.4.2 Install the SIM card
Slip Cellphone back shell and take out the battery after powered off.
Insert card in with the metal contacts facing down and the cut corner aligned with that
of the compartment.
Install the battery.
▲ Note:
Making a call, sending message need SIM card, you can make emergency call
without SIM card.
Keep SIM card even and neat.
Make sure Cellphone is powered off when install and remove SIM card.
2.4.3Power on/off
Power on
Press and hold lock key for more than 3 seconds to power on.
If “Pin Code Check” (please refer to page xxx) is set on, the phone will prompt you to enter
password. If only you input proper password (default as “1234”), the phone can enter idle
display.
You can dial emergency call in this interface, as follows:
If don’t inset SIM card, it will show prompt.
Power off