Data Sheet

2 Module interfaces
Pin No. Symbol I/O type Function
2 P11 AI ADC port, 12 bit/s,
which can be
reused as a
common I/O
interface and
corresponds to
P11 of the IC
3 EN I/O Enabling pin,
which is directly
connected to the
pin RESET_N.
During normal
operation of the
module, do not
connect the pin to
anything.
4 P14 I/O Common I/O pin,
which corresponds
to P14 on the
internal IC
5 P34 I/O Common I/O
interface, which
can be used as
PWM output of the
LED drive and
corresponds to
P34 of the IC
6 P33 I/O Common I/O
interface, which
can be used as
PWM output of the
LED drive and
corresponds to
P33 of the IC
5 / 26