Data Sheet

Tuya BT2L-A Datasheet 7 Packaging Information and Production Instructions
8/14
7 Packaging Information and Production Instructions
7.1 Mechanical Dimensions and Rear Solder Pad Dimensions
Figure 7-1 BT2L-A mechanical dimensions and rear solder pad dimensions
Note:
The default dimensional tolerance is ±0.35 mm, and the tolerance for some measurements is ±0.1 mm.
If a customer has other requirements, clearly specify them in the datasheet after communication.
7.2 Production Instructions
1. Use an SMT placement machine to mount the stamp hole module that Tuya produces onto the
PCB within 24 hours after the module is unpacked and the firmware is burned. If not, vacuum
pack the module again. Bake the module before mounting it onto the PCB.
(1) SMT placement equipment
 Reflow soldering machine
 Automated optical inspection (AOI) equipment
 Nozzle with a 6 mm to 8 mm diameter
(2) Baking equipment