Data Sheet
Table Of Contents
BT5S Module Datasheet 6 ANTENNA INFORMATION
6 Antenna Information
6.1 Antenna Type
BT5S uses an onboard PCB antenna.
6.2 Antenna Interference Reduction
To ensure optimal RF performance, it is recommended that the antenna be at least
15 mm away from other metal parts.
To prevent adverse impact on the antenna radiation performance, avoid copper or
traces along the antenna area on the PCB. Ensure that there are no substrate media
above or below the antenna and that copper is at a certain distance away from the
antenna to maximize the antenna radiation performance.
Figure 3: image.png
11 / 27