Data Sheet

6 PACKAGING INFORMATION AND PRODUCTION INSTRUCTIONS
6 Packaging information and production instructions
6.1 Mechanical dimensions
The mechanical dimensions of the PCB of CR2S are 15±0.35 mm (W)×18±0.35 mm
(L) ×0.8±0.1 mm (H). The following figure shows the mechanical dimensions of
CR2S:
{width=300px}
Note: The default dimensional tolerance is ±0.35 mm. If you have specific
requirements on dimensions, make them clear in the module datasheet after
communication.
6.2 Recommended PCB packaging
The following figure is a schematic diagram of CR2S which shows how pins corre-
spond to each other:
14 / 22