Data Sheet

8 PACKAGING INFORMATION AND PRODUCTION INSTRUCTIONS
6. Before SMT, take electrostatic discharge (ESD) protective measures.
7. To reduce the reflow defect rate, draw 10% of the products for visual inspection
and AOI before the first mounting to determine proper methods for controlling
the oven temperature and attaching and placing components. Draw 5 to 10
modules from subsequent batches each hour for visual inspection and AOI.
8.5 Recommended oven temperature curve
Perform SMT based on the following reflow oven temperature curve. The highest
temperature is 245°C. The reflow temperature curve is shown below:
Refer to IPC/JEDEC standard; Peak Temperature: \<245℃; The number of Times: ≤
2 times
22 / 26