Installation Instructions

ManualsBrandsHangzhou Tuya Information Technology ManualsElectronicsWi-Fi and Bluetooth Module

Federal Communication Commission Interference Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

Statements

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance

20cm between the radiator & your body.

RF Exposure: A distance of 20cm shall be maintained between the antenna and users,

and the transmitter module may not be co-located with any other transmitter or antenna.

ISED Statement

Innovation, Science and Economic Development Canada ICES‑003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to

the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired

operation of the device.

This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20cm

between the radiator and any part of your body.

tiquette de conformité à la NMB‑003 d’Innovation, Sciences et Développement économique Canada :

CAN ICES‑3 (B)/NMB‑3 (B)

L metteur/r cepteur exempt de licence contenu dans le pr sent appareil est conforme aux

CNR d Innovation, Sciences et D veloppement conomique Canada applicables aux appareils

radio exempts de licence. L exploitation est autoris e aux deux conditions suivantes :

1. L appareil ne doit pas produire de brouillage;

2. L appareil doit accepter tout brouillage radio lectrique subi, m me si le brouillage est

susceptible d en compromettre le fonctionnement.

Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de

s paration d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil

ettoutes les personnes.

Summary of content (37 pages)

PAGE 1
Statements Federal Communication Commission Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 2
Note: only for split air conditioner
PAGE 3
CONTENTS Wi-Fi Module specification and basic information..............................................1 Download and Install the App.............................................................................2 Activate APP.........................................................................................................3 Registration.........................................................................................................4 Login.........................................................
PAGE 4
Wi-Fi Module specification and Operation guideline 1. Minimum specifications on a Smart phone: Android 5.0 version or higher IOS 9.0 version or higher 2. Basic parameters for Wi-Fi module Parameters Details Network frequency 2.400 - 2.4835GHz Standards of WLAN IEEE 802.11 b/g/n (channels 1-14,channels 1-13 for EU/AU,channels 1-11 for US/CA) Protocol stack support IPv4/TCP/UDP/HTTPS/TLS/DNS Security support WEP/WPA/WPA2/AES128 Network type support STA/AP/STA+AP Max. RF Power 18.5dbm 2.402 - 2.
PAGE 5
Install the Wi-Fi module(Optional) 1. Open the panel of indoor unit. 2. Take off the cover of USB Wi-Fi, follow the arrow and insert the USB Wi-Fi module into the reserved USB slot on the frame.Close the panel.
PAGE 6
Download and Install the App Smart Life For Android smart phone Method1: Please scan the QR code with a browser scanner, download and install the APP. Method2: Open the Google "Play Store" on your smart phone and search "Smart Life", download and install the APP. For IOS smart phone Method1: Please scan the QR code and follow the tips to get into "AppStore", download and install the APP. Method2: Open the Apple "AppStore" on your smart phone and search "Smart Life", download and install the APP.
PAGE 7
Activate APP The first time the app is used, it will need activating. 1. Launch the APP "Smart Life" on your smart phone. Smart Life 2. Method1:Tap button "Scan" and scan the right Activate QR code Method2: Tap "or Enter Activation Code" in bottom of the screen, then enter the activate code and tap "CONFIRM".
PAGE 8
Registration 1.If you don't have any account please tap button "Register". 2.Read the Privacy Policy and tap "Agree". Privacy Policy we pay high attention to the privacy of personal information. To fully present how we collect and use your personal information, we revised the Privacy Policy in detail in compliance with the latest laws and regulations. By clicking Agree, you agree that you have fully read, understood and accepted all the content of the revised Privacy policy.
PAGE 9
Registration 6.Enter the verification code you received from phone message or e-mail. 7.Set the Password with 6-20 characters including characters and numbers. 8.Tap "Done". < < Enter verification code * * * * * * Set Password ****** 6-20 characters for password, including character, numbers Verification code is sent to your phone: 86-***********,Resend(55s) Done Login Login 1.Tap "Log in with existing account". 2.Enter your registered account and password. 3.Tap "Log in" button.
PAGE 10
Login The first time the APP is used, Create family is needed: 4.Tap "Create family". 5.Make name for the family. 6.Set the location. 7.Choose default rooms or add new rooms. 8.Tap "Done" and "Completed". Turn on your smart life Create family Log out Family created successfully < View family Family Name Family Location My home Set location Smart devices in rooms: Living Room choose the recommended room or make a new room, then tap Done.
PAGE 11
Login Forgot the password If you forgot the password, you can login as below: (Only for phone number accounts) 1.Tap "SMS verify and sign in". 2.Enter your phone number and tap button "Obtain verification code". 3.Enter the verification code received by your phone.
PAGE 12
Add device There are 3 methods to add the device. CF mode 1.Power on the indoor unit, no need to launch the air conditioner. 2.Click "+" in the upper right corner of the "Home" screen or tap "Add device" on the room which has no device. 3.Tap the "Air conditioner(BT+Wi-Fi)" logo. 4.Follow the comments on the next screen to reset the Wi-Fi module then check "Confirm the device is reset" and tap"Next". 5.Input the password of the Wi-Fi which the same as your smart phone connected, then tap "Next". 6.
PAGE 13
Add device There are 3 methods to add the device. AP mode 1.Power on the indoor unit, no need to launch the air conditioner. 2.Click "+" in the upper right corner of the "Home" screen or tap "Add device" on the room which has no device. 3.Tap the "Air conditioner(BT+Wi-Fi)" logo. 4.Tap in the upper right corner and choose "AP Mode" then follow the comments on the screen to reset the Wi-Fi module then check "Confirm the device is reset" and tap"Next". 5.
PAGE 14
Add device There are 3 methods to add the device. Blue tooth mode 1.Power on the indoor unit, no need to launch the air conditioner. 2.Click "+" in the upper right corner of the "Home" screen or tap "Add device" on the room which has no device. 3.Tap the "Air conditioner(BT+Wi-Fi)" logo. 4.Make sure Blue tooth of your smart phone is available. 5.
PAGE 15
Add device AP mode Add Manually V Living Room Master Bedroom... All Devices No device Add Device Me Home AP Mode Enter Wi-Fi password Add Device Press the DISPLAY on the remote control key 6 times in the time of 6 seconds until the LCD screen show "AP" Window Ty Split Air condipe Air Conditi... tioner Portable Air cond... Set your home location, get more information Search Device Large Home Ap... Security & Sensors Welcome home < < < + my home > 1.
PAGE 16
Air conditioner control The device control screen will pop up automatically after adding the device. The device control screen will pop up manually by tapping the device name on the home screen. + > my home Set your home location, get more information All Devices V Welcome home Living Room Master Bedroom... Sample1 Turned off < Sample2 Already On Me Home Note: There are two different control forms base on different software or Wi-Fi module firmware.
PAGE 17
Air conditioner control Control form1 The main control interface Back to the Home screen < Device details and management Sample2 Turn ON/OFF the air conditioner 23 Indicator of setting temperature C Set Temperature Selected Mode/Fan speed/ Functions indicator Increase the setting temperature Decrease the setting temperature Mode Fan Function 11 Timer
PAGE 18
Air conditioner control Control form1-Mode setting 1.Tap Mode to pop up the Mode screen. 2.Select one of the mode Feel/Cool/Heat/Dry/Fan. 3.Tap anywhere around the setting temperature to cancel the Mode setting. < Sample2 23 C Set Temperature Mode Feel Cool Dry Fan Mode Fan Heat Function Timer Control form1-Select fan speed 1.Tap Fan to pop up the Fan screen. 2.Select one of the fan speed High/med/Low/Auto. 3.Tap anywhere around the setting temperature to cancel the selection.
PAGE 19
Air conditioner control Control form1-Function setting 1.Tap Function to pop up the Function screen. 2.Select one of the functions Sleep/Turbo/ECO. 3.Select UP-DOWN/LEFT-RIGHT for auto swing with direction of UP-DOWN/LEFT-RIGHT. 4.Tap anywhere around the setting temperature to cancel the Function setting. < Sample2 23 C Set Temperature Function Sleep Turbo UP-DOWN LEFT-RIGHT Mode Fan ECO Function Timer Control form1-Timer adding 1.Tap Timer to pop up the Add Timer screen. 2.Tap Add Timer.
PAGE 20
Air conditioner control Control form1-Timer adding 3.Select the time, select the repeat days and Timer on/off. 4.Select the Mode/Fan speed/Function and select the setting temperature for Timer on. 5.Tap Save to add the timer.
PAGE 21
Air conditioner control Control form2 The main control interface Back to the Home screen Sample1 Tips Name of the device Current mode Cool 25 0 Decrease the setting temperature Increase the setting temperature Different background for different mode: Cool/Heat/Dry/Fan/Auto Selected Functions indicator Function Buttons Power on/off ON/OFF Mode Fan Speed Precision Air Flow Note: it may appear slightly different , depending on the air conditionermodel.
PAGE 22
Air conditioner control Control form2-Mode setting 1.Tap the Mode button. 2. There are 5 modes on the Mode screen, tap one button to set the Air conditioner working mode. 3.Tap the X button to back the main control screen. 4.The mode and background will change on the screen. Sample1 Sample1 Cool Back Cool 25 0 25 0 Note: please read the details of each mode in the user manual to control more comfortable.
PAGE 23
Air conditioner control Control form2-Air Flow control 1.Tap the Precision Air Flow button or Swing Flow button. 2.Choose your desired air flow and tap it. 3.Tap the X button to back to the main control screen. 4.The selected air flow indicator will appear on the screen. Note: For some models without auto Left-Right wind, If you active it, you will hear a beep,but no any actions.
PAGE 24
Air conditioner control Control form2-ECO function 1.For Eco function, just tap the button to activate the function, the button will be lighting and the indicator will appear on the screen. 2.Tap again to disable the function. 3.Temperature controlled for some air conditioner model: In Cooling mode, the new setting temperature will 26 . In heating mode, the new setting temperature will 25 .
PAGE 25
Air conditioner control Control form2-Sleep function 1.Tap the Sleep button. 2.Choose your desired sleep mode and tap it. 3.Tap the X button to back to the main control screen. 4.The selected sleep mode indicator will appear on the screen. Sample1 Sample1 Back Mode Cool 25 0 25 0 Yes Fan Cool Heat Sleep enabled Dry Heat Yes Auto Sleep X Sleep is disabled on Fan/ Dry/Auto mode .
PAGE 26
Air conditioner control Control form2-Timer(on) setting 1.Tap the Timer button. 2.Tap + in the upper right corner of the Timer main screen. 3.Choose the Time/Repeat/Switch OFF then tap Save. 4.The timer(off) will appear on the Timer main screen. Sample1 < Timer Cool 25 0 No Timer ON/OFF Mode Eco Sleep < Timer More Tap repeat > then tap your desired repeat days or Once, then tap Confirm your selection.
PAGE 27
Air conditioner control Control form2-Timer(off) setting 1.Tap the Timer button. 2.Tap + in the upper right corner of the Timer main screen. 3.Set the Time/Repeat Date/Switch(ON)/Temperature/Mode/ Fan speed/Air Flow as your desired and then tap Save. 4.The timer will appear on the Timer main screen.
PAGE 28
Air conditioner control Control form2-Timer management 1.Change the Timer setting: Tap anywhere of the timer list bar except the switch bar to get into the Timer setting screen, change the setting and then tap save. 2.Enable or Disable the Timer: Tap the left of the switch to disable the Timer. Tap the right of the switch to enable the Timer. 3.Delete the Timer: Slide the list bar of the Timer from right to left until Delete button appear, then tap delete.
PAGE 29
Air conditioner control Control form2-More functions 1.Tap the More button to operate additional functions if it appears on the screen. < Sample1 More Cool 25 0 ON/OFF Mode Eco Sleep Display Buzzer Anti-Mildew GEN Mode Health Reservation Electricity Management Electricity Monitoring Self-diagnosis Fan Speed Precision Air Flow Timer More Note: Some air conditioner model don't have the more button.
PAGE 30
Air conditioner control Control form2-More functions 6. Tap the "GEN Mode" button, if it is available on the screen. In this Mode, you can choose one of the three levels of current. The air conditioner will maintain proper current to save energy. GEN Mode GEN Mode X 30% 50% 80% LV1 LV2 LV3 7. Tap the "Electricity Monitoring" button if it is available on the screen. In this function, you can monitor the air conditioner electricity consumption.
PAGE 31
Air conditioner control Control form2-More functions 10.Tap the "Reservation" button , if it is available on the screen. You can set the time, repeat day, temperature, mode, fan speed, air flow as you desired and then tap Save to activate the function. The air conditioner will automatically reach your settings at the appointment time. < 14 15 16 17 18 17 18 : 19 20 21 Repeat setting Reservation < Reservation Reservation 16:19:00 ON,Cool,Mid,Up-Down Swing 25 ,M...
PAGE 32
Air conditioner control control-Additional functions(More) Control form2-More functions 12. Tap the "Photosensitive" button if it is available on the screen. This function allow the air conditioner to turn on/off the display automatically according to the light intensity. 13. Tap the "Soft wind" button if it is available on the screen. In this function, the air conditioner will blow soft airflow through the micro holes on the deflector.
PAGE 33
Air conditioner control Device details and management Tap on control form1 or tap ... on control form2 , get into the device details screen. Here you can get some useful information and sharing the device to other accounts. Check the following pictures and instructions carefully.
PAGE 34
Air conditioner control Device details and management How to share the devices to other accounts? 1. Tap "Device Sharing" and pop up Device Sharing screen. 2. Tap "Add Sharing". 3. Select the region and enter the account which you want to sharing. 4. Tap "Completed", the account will appear on your sharing list. 5. The received sharing members should hold pressing the home screen and slide down to refresh the device list, the device will appear on the device list.
PAGE 35
Account management Account Profile setting + > my home Profile Set your home location, get more information > Home Management > V Welcome home Nick name Account****** Living Room Master Bedroom...
PAGE 36
Account management Home(Family) management 1.Tap the name of home at the left upper corner of the Home Screen and select the Home Management. Or tap Me and tap Home Management. 2. Tap one of the families in the family list and get into Family Settings screen. + > My Home < My Home My Office V Welcome home Set your home location, get more information Home Management All Devices > Add family Living Room Master Bedroom...
PAGE 37
Notice 1. For technical update, there is maybe deviation of the actual items from what is on the manual. We express our apologies. Please refer to your actual product and APP. 2. Smart air conditioner APP can be altered without notice for quality improvement and also be deleted depending on the circumstances of manufacturing firms . 3. In case Wi-Fi signal strength is weakened, smart App may be disconnected. So make sure the indoor unit near to wireless router. 4.