SMART C A M E R A USER MANUAL
Thank you for purchasing Smart Camera. Get started using your new devices by downloading TuyaSmart, one convenient app that manages everything straight from your phone. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips.
Contents Download & Register Plug In 2-4 5 Connect (SmartConfig) 6-7 Connect (QR code net-pairing) 8-9 Questions, Troubleshooting, Notices 10-13
What’s in the Box USER MANUAL • Smart Wi-Fi Camera • Power Adapter • USB Cable • User Manua Get Ready networks) Android™ 4.
1 Download the TuyaSmart app from App Store or Google Play
2 Register an account on your TuyaSmart app STEP 1. STEP 2. Enter your mobile phone number or email address. Enter the verification code and create a password.
2 Register an account on your TuyaSmart app STEP 3. Login to the App.
3 Plug in How do I reset my device? Use the reset pin to press the Reset Button (as pic 1) for several seconds until the camera starts to beep.
4 Add device. Method 1: SmartConfig STEP 1 STEP 2 In the app, on the top corner of the Devices screen, click (+). Make sure the indicator light on the device is flashing Red, indicating the device is ready to connect. If not, follow instructions to Reset the device so that indicator light is flashing red. Choose “Smart Camera” then press “Next Step”.
4 Add device. Method 1: SmartConfig STEP 4 STEP 3 Enter your Wi-Fi network and password. The app will try to connect your device. During this time, the camera will beep, start quickly blinking Red, and then turn solid Green.
*If the connection fails, try to connect directly using QR Code Mode. Add device.
5 Add device.
5 Add device. Method 2: QR code net-pairing STEP 3 Enter your Wi-Fi network and password.
Frequently Asked Questions 1.Can I share with family and friends? Yes, you can share your cameras with family and friends who will have access to view the camera and control your bulbs, plugs, and other devices. In the app, press the Profile button and click on the “Device Sharing” button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the app and registered a new account.
2. what’s the wireless range? The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check your router specifications for exact range data. 3.The device appears offline or unreachable? Make sure your Wi-Fi router is online and in range. Make sure you have the latest app functionality by clicking “Check for firmware update” in your device settings. 4. Cannot connect to your Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup.
System Requirements • Mobile device running iOS® 8 or higher or Android™ 4.1x or higher • Existing Wi-Fi Network Technical Specifications • Camera: up to 10800p (1920x1080) at 20 frames / sec. H.264 encoding • Storage: supports up to 128G Micro SD card (not included) • Wi-Fi: IEEE 802.11b/g/n, 2.
CE Notice: CE Products with the CE marking comply with the Radio Equipment Directive (2014/53/EU), the Electromagnetic Compatibility Directive (2014/30/EU), the Low Voltage Directive (2014/35/EU) – issued by the Commission of the European. Compliance with these directives implies conformity to the following European Standards: EN300328 V2.1.1 EN301489-1/-17 V2.1.
FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Product Specification