User's Manual

TYBT5 user manual
2. Dimensions and Footprint
2.1 Dimensions
TYBT5 have double sides of golden finger pins. The distance between each Pin is 2.0mm.
Size of TYBT5: 14.8mm(W)*20.4mm(L)*1.8mm(H).
Figure 2 shows the dimensions of TYBT5.
Figure 2. The dimensions of TYBT5
2.2 Pin Definition
Table 1 shows the general pin attributes of TYBT5
Table 1. The typical pin definition of TYBT5
PIN No.
NAME
I/O TYPE
DESCRIPTION
1
PWM1
I/O
PWM output pin, default for LED line
2
PWM0
I/O
PWM output pin, default for LED line
3
I2C_SDA
I/O
I2C, data interface
4
I2C_SCL
I/O
I2C, clock interface
5
3.3V
P
Supply voltage
6
PB1
I/O
PWM output pin, default for LED line
7
GND
P
Ground
0
SWS
I/O
Bluetooth chipset burning pin
00
PWM4
I/O
PWM output pin, default for LED line
8
RX
I/O
UART RX
9
RST
I
Reset pin for the module
10
3.3V
P
Supply voltage for the module
11
TX
I/O
UART TX
12
PWM5
I/O
PWM output pin, default for LED line
Note: P: Power supply pins; I/O: Digital input or output pins.
SWS is only for Bluetooth chipset burning.
If there’s any customization needed for PWM output, please contact our BD manager.