User's Manual

TYBT5 user manual
6. Packaging Information And Production Guide
6.1 Mechanical Dimensions
6.2 Production Gu
ide
 The storage for the delivered module should meet the following condition:
1. The anti-moisture bag should be kept in the environment with temperature < 30℃ and
humidity < 85% RH.
2. The e
xpiration date is 6 months since the dry packaging products was sealed.
 Cautions:
1. All the operators should wear electrostatic ring in t
he whole process of production.
2. While operating, water and dirt should not have any contact with the modules.
FCC Statement:
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
FCC Label Instructions:
The outside of final products that contains this module device must display a label
referring to the enclosed module. This exterior label can use wording such as: “Contains
Transmitter Module FCC ID: 2ANDL-TYBT5”,or “Contains FCC ID: 2ANDL-TYBT5 ”, Any
similar wording that expresses the same meaning may be used.