Product Manual

WB3S-IPEX-IPEX Datasheet
6
2 Module Interfaces
2.1 Dimensions and Footprint
WB3S-IPEX has two rows of pins with a 2 mm pin spacing.
TheWB3S-IPEX dimensions (H x W x D) are 3.5 mm x 16 mm x 24 mm. Figure 2-1
shows theWB3S-IPEX front and rear views.
Note:
The default dimensional tolerance is ±0.35 mm. If a customer has other requirements,
clearly specify them in the datasheet after communication.
Figure 2-1WB3S-IPEX front and rear views
2.2 Interface Pin Definition
Table 2-1WB3S-IPEX interface pins
Pin No.
Symbol
I/O Type
Function
1
CEN
I/O
Chip enabling pin, which is active at a low level
and is connected to the CEN pin on the internal
IC
2
ADC3
AI
ADC pin, which is connected to the P23 pin on
the internal IC
3
EN
Input
Enabling pin, which is internally pulled up and