Data Sheet

2 Module interfaces
Pin number Symbol Type Function
8 C4 I/O ADC pin, which
corresponds to
TL_C4 (Pin 24) on
the internal IC
9 B4 I/O Common I/O
interface, which
can be used as
PWM output of the
LED drive and
corresponds to
TL_B4 of the IC
(Pin 14)
10 RST I Reset pin (low
active),
correspond to
RESETB (Pin 25)
on the internal IC
11 B5 I/O Common I/O
interface, which
can be used as
PWM output of the
LED drive and
corresponds to
TL_B5 of the IC
(Pin15)
12 SWS I/O Burning pin, which
corresponds to
SWS (Pin 5) on the
internal IC
Note:
• P indicates a power supply pin and I/O indicates an input/output pin.
• If you have any special requirements on the light colour controlled by the
7 / 29