User's Manual

49 Starting Installation
Instructions for Replacing KAT SHOES
Steps for Replacing Sliders
The sliders and the wheels are designed with a snap-fit slot, during the replacement,
1. Hold the two ends of the KAT SHOES and squeeze it inwards with the sole bulging out.
2. As the slot of the slider expands, the old slider can be removed very easily.
It is advised to replace the wheel at the rear part of the KAT SHOES if it is loose or cannot roll properly.
It is advised to replace the sliders on the sole of the KAT SHOES if they are severely abraded. As the slider in the front is
more prone to abrasion than the other one, they may be swapped before the replacement.
It is suggested to replace the KAT SHOES if the surface is abraded.